Cyberpower RMCARD205 [12/18] Reset to factory default setting recover from a lost password

RESET TO FACTORY DEFAULT SETTING/RECOVER

FROM A LOST PASSWORD

To reset the CyberPower Remote Management Card to its factory

default setting (including web log-in user name and password),

please follow these steps:

RMCARD205

RMCARD305

1. Remove the card from the UPS/ATS PDU without turning the

UPS/ATS PDU o.

2. Remove the jumper from the reset pins as illustrated. Do not

dispose of the jumper.

3. Insert the card into the expansion port on the UPS/ATS PDU.

4. Wait until the green Tx/Rx LED is ﬂashing (the frequency of the

ON/OFF ﬂashing is once per second).

5. Remove the card again.

6. Place the jumper back onto the Reset pins.

7. Install card into the expansion port again and tighten the

retaining screws.

RESET JUMPER