Cyberpower RMCARD205 [6/18] Step 2 conﬁgure the ip address for the cyberpower remote management card

Figure 1. The main window of the “Power Device Network Utility” program

4. Select the Remote Management Card you are setting up. Click

on the Tools menu and select “Device Setup” or double click

the Remote Management Card you want to conﬁgure.

5. You can modify the IP

Address, Subnet Mask, and

Gateway address for the

Device MAC Address listed in

the Device Network Settings

window, as shown in Figure

2. The factory default IP

Address is 192.168.20.177

and the default Subnet Mask

is 255.255.255.0.

6. Modify the IP, subnet mask or

gateway address. Enter the

new addresses into the

corresponding ﬁelds and then

click “Save”.

Figure 2. The Device Network setting window

Step 2. Conﬁgure the IP Address for the CyberPower

Remote Management Card

Method 1: Using the Power Device Network Utility

1. Install the Power Device Network Utility available for

download at www.CyberPower.com.

2. After installation completes, run the “Power Device Network

Utility”.

3. The main window of the Power Device Network Utility

program is shown in Figure 1. The conﬁguration tool will

display all CyberPower Remote Management devices present

on the local network subnet. The "Refresh" button is used to

search the local network subnet again.