Philips AC2721/10 [9/98] Get started

Philips AC2721/10 [9/98] Get started
7EN
English
3 Get started
Installing the
NanoProtect lter
Before using the appliance, remove all
packaging materials of the lter and
place it into the appliance described as
follows:
Note
Make sure that the side with the tag
is pointing towards you.
1 Pull the top part of the back panel
towards you to release it from the
appliance (g. c).
2 Press the clip down and pull the
pre-lter towards you (g. d).
3 Remove all lters (g. e).
4 Remove all packaging materials of
the NanoProtect lter (g. f) .
5 Place the NanoProtect lter back
into the appliance (g. g).
6 Put the pre-lter back into the
appliance, mount the pre-lter onto
the bottom of the appliance rst,
and then push the clips on the top
of pre-lter against the appliance
(g. h).
7 To reattach the back cover, mount
the panel onto the bottom of the
appliance rst, and then push
the top of the panel against the
appliance (g. i).
Preparing for
humidication
1 Pull out the water tank (g. j).
2 Lift the water tray upwards and pull
it out horizontally (g. k).
3 Remove all packaging material
of the NanoCloud rotary
humidication wick (g. l).
Note
The humidication wick has been
assembled on the wick wheel upon
purchase.
4 Place the wick wheel on the wick
support (g. m).
Note
When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
5 Place the water tray back into the
appliance (g. n).
6 Turn the top cap of the water tank
anti-clockwise to unscrew it (g. o).
7 Fill the water tank with cold tap
water (g. p).
8 Turn the top cap clockwise to tightly
lock it onto the water tank (g. q).
9 Place the water tank back into the
appliance (g. r).

Содержание