Beko OSC 22130 X Инструкция по эксплуатации онлайн [33/44] 4349

Содержание

Use the slots or wire handles located at both sides to move the appliance H If the appliance has wire handles push the handles back into the side walls after moving the appliance Connection to the mains supply QJ This appliance must be earthed Our company shall not be held responsible for any damage caused by using the appliance without an earthed socket A Risk of electric shock short circuit or fire by unprofessional installation The appliance may be connected to the mains supply only by an authorized qualified person and the appliance is only guaranteed after correct installation A Risk of electric shock short circuit or fire by damage of the mains lead The mains lead must not be clamped bent or trapped or come into contact with hot parts of the appliance If the mains lead is damaged it must be replaced by a qualified electrician The mains supply must correspond to the data specified on the rating plate of the appliance The rating plate can be seen when the front door is opened The appliance mains cable must correspond to the specifications and the power consumption see Technical Data page 5 A Risk of electric shock Before starting any work on the electrical installation please disconnect the appliance from the mains supply 1 If no all pole separation from the mains supply is possible a separation unit must be connected with a contact distance of 3 mm min fuses line safety switches contactors all poles which should be adjacent to but not above the cooker in accordance with IEE regulations Failure to observe this instruction may result in operational problems and invalidation of the appliance warranty Additional protection by a residual current circuit breaker is recommended If a cable without a plug is provided together with your appliance 2 for mono phase connection take care to connect as below Brown cable L Phase Blue cable N Neutral 12 EN