Hotpoint-Ariston LSF 8357 WH [19/28] Do not use washing up liquid

Hotpoint-Ariston LSF 8357 WH [19/28] Do not use washing up liquid
EN
19
Start-up and use
Measuring out the detergent
A good wash result also depends on the correct
amount of detergent being used; exceeding the stated
amount does not result in a more effective wash and
increases environmental pollution.
Only use detergent which has been
specifically designed for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam
residue remaining in the machine after the cycle
has ended.
The use of tablets is only recommended for
models which offer the MULTI-FUNCTIONAL
TABLETS option.
To achieve the best results from each washing
and drying cycle, powder detergent, rinse aid liquid
and salt should be used.
Compartment A: Washing detergent
Compartment B: Pre-wash detergent
1. Open cover C by pressing
button D.
2. Pour in the detergent after
consulting the Table of wash
cycles:
 For powder detergent use
compartments A and B.
 For detergent in tablet form:
when the cycle requires 1 tablet, place it in compartment
A and close the cover; when it requires 2, place the
second tablet at the bottom of the appliance.
3. Remove detergent residues from the edges of the
compartment and close the cover until it clicks.
A
B
D
C
* Only available in selected models.
Starting the dishwasher
1. Turn the water tap on.
2. Press the ON/OFF button: all the indicator lights on
the control panel will light up for a few seconds.
3. Open the door and pour in a suitable amount of
detergent (see below).
4. Load the racks (see Loading the racks) and shut the
door.
5. Select the wash cycle in accordance with the type
of crockery and its soil level (see Table of wash
cycles) by pressing the P button.
6. Select the wash options* (see adjacent
information).
7. Start the cycle by pressing the Start/Pause button
(fixed light). A long beep signals the start of the wash
cycle; the wash cycle indicator light is illuminated and
the time remaining until the end of the cycle is
displayed.
8. Two short beeps and one long one indicate the end
of the wash cycle; the Start/Pause button switches off
and the word END appears on the display. Switch off
the appliance by pressing the ON/OFF button, shut off
the water valve and unplug the appliance from the
electricity socket.
9. Wait for a few minutes before removing the
crockery, in order to avoid burns. Unload the racks,
beginning with the lower level.
- The machine will switch off automatically
during certain periods of inactivity, in order to
minimise electricity consumption.
Modifying a wash cycle in progress
If a mistake was made during the wash cycle selection
process it is possible to change the cycle, provided that
it has only just begun: once the wash cycle has started,
switch off the machine by pressing and holding the ON/
OFF/Reset button. Switch it back on using the same
button and select the desired wash cycle and options.
Adding extra crockery
Press the Start/Pause button (the corresponding
indicator light will flash). Open the door, taking care to
avoid the escaping steam, and place the crockery inside
the appliance. Press the Start/Pause button (fixed light):
the cycle starts from the point at which it was interrupted.
If the Start/Pause button is pressed so as to pause the
machine, the wash cycle or the Delayed Start
* function
(if selected) is interrupted.
At this stage it is not possible to change the wash cycle.
Accidental interruptions
If the door is opened during the wash cycle, or if there is
a power cut, the cycle stops. It starts again from the point
at which it was interrupted once the door has been shut
or once the electricity supply is restored.

Содержание

Start up and use Starting the dishwasher 1 Turn the water tap on 2 Press the ON OFF button all the indicator lights on the control panel will light up for a few seconds 3 Open the door and pour in a suitable amount of detergent see below 4 Load the racks see Loading the racks and shut the door 5 Select the wash cycle in accordance with the type of crockery and its soil level see Table of wash cycles by pressing the P button 6 Select the wash options see adjacent information 7 Start the cycle by pressing the Start Pause button fixed light A long beep signals the start of the wash cycle the wash cycle indicator light is illuminated and the time remaining until the end of the cycle is displayed 8 Two short beeps and one long one indicate the end of the wash cycle the Start Pause button switches off and the word END appears on the display Switch off the appliance by pressing the ON OFF button shut off the water valve and unplug the appliance from the electricity socket 9 Wait for a few minutes before removing the crockery in order to avoid burns Unload the racks beginning with the lower level M The machine will switch off automatically during certain periods of inactivity in order to minimise electricity consumption Modifying a wash cycle in progress If a mistake was made during the wash cycle selection process it is possible to change the cycle provided that it has only just begun once the wash cycle has started switch off the machine by pressing and holding the ON OFF Reset button Switch it back on using the same button and select the desired wash cycle and options Measuring out the detergent EN A good wash result also depends on the correct amount of detergent being used exceeding the stated amount does not result in a more effective wash and increases environmental pollution 53 Only use detergent which has been specifically designed for dishwashers 53 DO NOT USE washing up liquid 53 Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended 53 The use of tablets is only recommended for models which offer the MULTI FUNCTIONAL TABLETS option S3 To achieve the best results from each washing and drying cycle powder detergent rinse aid liquid and salt should be used Compartment A Washing detergent Compartment B Pre wash detergent 1 Open cover C by pressing button D 2 Pour in the detergent after consulting the Table of wash cycles For powder detergent use compartments A and B For detergent in tablet form when the cycle requires 1 tablet place it in compartment A and close the cover when it requires 2 place the second tablet at the bottom of the appliance 3 Remove detergent residues from the edges of the compartment and close the cover until it clicks Adding extra crockery Press the Start Pause button the corresponding indicator light will flash Open the door taking care to avoid the escaping steam and place the crockery inside the appliance Press the Start Pause button fixed light the cycle starts from the point at which it was interrupted M If the Start Pause button is pressed so as to pause the machine the wash cycle or the Delayed Start function if selected is interrupted At this stage it is not possible to change the wash cycle Accidental interruptions If the door is opened during the wash cycle or if there is a power cut the cycle stops It starts again from the point at which it was interrupted once the door has been shut or once the electricity supply is restored Only available in selected models 19