Dometic CoolAir SP-FF для Mercedes Benz Actros MegaSpace [9/72] Guarantee

CoolAir SP950C Guarantee

Fit the fastening frame and the CoolAir SP950 parking cooler on the Mercedes Benz

Actros Megaspace as follows:

➤ Insert and tighten the four M8 x 30 bolts, eight U washers M8 8.4 x 16 mm and

four M8 retaining nuts (fig. 1, page 3) in the mounting frame for the condenser

unit.

➤ Remove the existing threaded bolt (fig. 2 2, page 4).

➤ Drill two holes (fig. 2 3, page 4) to the left and right of the second self-tapping

screw (fig. 2 1, page 4) to make the M10 drill holes below accessible:

–Diameter: 22mm

– Distance from the middle self-tapping screw: 71 mm

➤ Attach the mounting frame at the top using the M10 x 35 ribbed bolts provided

(fig. 2 3, page 4).

➤ Attach the mounting frame at the bottom using the M8 x 40 ribbed bolt provided

(fig. 2 2, page 4).

➤ Place the condenser unit on the projecting bolts of the mounting frame and bolt

to the four U washers M8 8.4 x 16 mm and four M8 retaining nuts.

➤ Tighten all bolts.

➤ Check that all bolts are still tight after travelling approximately 200 km.

7Guarantee

The statutory warranty period applies. If the product is defective, please contact the

service partner in your country (addresses on the back on the instruction manual).

Our experts will be happy to help you and will discuss the warranty process with you

in more detail.

SP950C-Actros--I-16s.book Seite 9 Freitag, 24. Februar 2017 5:09 17