Fluke 53 II [14/26] Changing the logging interval

53 & 54 Series II

Users Manual

Changing the Logging Interval

The logging interval determines how often the

thermometer stores logged readings in memory. You

choose the length of the logging interval. See "Using

Memory."

The thermometer stores logged readings at the end of

each logging interval. You can select a logging interval of

1 second (1), 10 seconds (2), 1 minute (3), 10 minutes (4),

or user-defined (

USef).

You can also set the logging interval manually (0). Each

time you press

J, the thermometer stores the current

readings in memory.

1. Press K or N until the display shows INTERVAL.

2. Press

E to display the logging interval choices.

3. Press

K or N until the display shows the logging

interval you want, and then press

E to select.

4. If you selected a user-defined logging interval:

• Press K or N until the display shows

hour:min or min:sec, and then press

E to

select.

The left two digits blink.

• Press

K or N until the left two digits you want

appear on the display, and then press

E to

select them.

The right two digits blink.

• Press

K or N until the right two digits you

want appear on the display, and then press

to select them.

Holding down

K or N causes the number to

change more quickly.