Binks Mach 1SL 1,4 мм [5/8] Fluid nozzles
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Binks Mach 1SL 1,4 мм [5/8] Fluid nozzles

Binks Mach 1SL 1,4 мм [5/8] Fluid nozzles
EN
77-2665-R13.2 (10/2015) 5 / 8
94VT (.052”) 1.3mm Carbide Tip 94P, 97P, 100P 54-4383 VT
903 (.079”) 2.0 mm
54-4382
905 (.089”) 2.3 mm
905P
54-4382
906 (.100”) 2.5 mm 54-4382
909 (.111”) 2.8 mm 54-4382
STANDARD FLUID NOZZLES
FLUID NOZZLES
94P
97P
91P, 92P*
95AP**●
97AP**●
ULTRA LIGHT / Reduced Flow 89 (.020” Dia.) 0.5 mm
VERY LIGHT / Reduced Flow 90 (.030” Dia.) 0.8 mm
LIGHT: less than 15 to 20 seconds in a Zahn 2 Cup, 91 (.040” Dia.) 1.0 mm 90P***,
e.g., stains, varnishes, thin lacquers, automotive refinishing fluids.
92 (.046” Dia.) 1.2 mm 95P, 97P, 54-4382
93 (.051” Dia.) 1.3 mm 92P* SEE NOTE
MEDIUM: 20 to 60 seconds in a ZAHN 2 Cup, 94 (.055” Dia.) 1.4 mm 95AP, 97AP**
e.g., general industrial coatings
. 95 (.059” Dia.) 1.5 mm 93P, 94P, 100P
96 (.063” Dia.) 1.6 mm
HEAVY: greater than 60 seconds in a Zahn 2 Cup. 97 (.070” Dia.) 1.7 mm
FLUID
FLUID NOZZLE NO.
APPLICABLE
AIR NOZZLE
FLUID
NEEDLE
SPECIAL PURPOSE NOZZLES
TYPICAL APPLICATION
FLUID NOZZLE NO.
APPLICABLE
AIR NOZZLE
COMPATIBLE
FLUID
NEEDLE
VERY HEAVY FLUIDS:
Block Fillers, Texture Coatings, Fire
Retardants, Road Marking Paint,
Bitumastics, Adhesives, Celluar
Plastisols, Underbody & Vitreous
Coatings, Special Applications
FEATHERING
For applications requiring more
gradual fluid valve opening for
metering control of fluid flow
with trigger
SIPHON FEED-FINE FINISH
Light to medium fluids
Auto body spot repairs
Medium to heavy fluids
Auto body overall finishing
94s (.055") 1.4 mm 95AS● 54-4390
97s (.070") 1.7 mm 54-4391
GS FLUID NOZZLES
LIGHT/MEDIUM: less than15 to 20 seconds in a Zahn 2 Cup, 92GS (.046” Dia.) 1.2 mm SEE NOTE
e.g., stains, varnishes,thin lacquers, automotive refinishing materials.
94GS (.055” Dia.) 1.4 mm
MEDIUM: 20 to 60 seconds in a ZAHN 2 Cup, 96GS (.063” Dia.) 1.6 mm
96G ■ 54-4547
e.g., general industrial coatings.
FLUID
FLUID NOZZLE NO.
APPLICABLE
AIR NOZZLE
FLUID
NEEDLE
NOTE: Optimum setup for clear coat spray is 92GS Fluid Nozzle x 96G Air Nozzle Assembly.
* 92P Low Volume Nozzle for general industrial and
automotive fine finish.
** 95AP High Solids Nozzle for hard to atomize
coatings and higher flow rates. 97AP same as
95AP, but for wider fan if needed.
*** 90P Low Volume Nozzle, 1 1/2 H.P. Compressor or
bigger – (6 C.F.M) required.
● 95AP, 95AS and 97AP Air Nozzles do not require
separate Retainer Ring.
■ Improves atomization, breaks-up high solid material
easier, provides better finish at lower pressures
and reduces orange-peel dramatically.
54-4547 needle must be used in conjunction
with the GS fluid nozzle and 96G air nozzle.
54-4387
54-4389
54-4390
54-4391
90F (.030") 0.8 mm
92F (.046") 1.2 mm
94F (.055") 1.4 mm
97F (.070") 1.7 mm

Содержание

Похожие устройства

Скачать