Tascam DA-6400 [3/36] Da 6400 da 6400dp
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Tascam DA-6400 [3/36] Da 6400 da 6400dp

Tascam DA-6400 [3/36] Da 6400 da 6400dp
TASCAM DA-6400/DA-6400dp
3
DA-6400/DA-6400dp
NOTE
i The cascade status is also shown on the
INFORMATION
screen.
i If the status is anything other than
Cascade OFF
or
OK
, the INFO indicator lights red, and an
ERROR INFORMATION
or
ALERT
INFORMATION
screen appears with an error/alert as shown below.
ERROR INFORMATION
screen
ALERT INFORMATION
screen
i If one of the above cascade errors occurs, recording/playback cannot be started.
i If one of the above cascade alerts occurs, recording/playback can be started. if the error is
Offline (No Slaves)
, then only the
cascade master unit will operate.
CASCADE UNITS
This shows the IDs of the cascade units recognized by this unit.
Check whether each device is operating with cascade synchronization by looking at its
CASCADE STATUS
item.
Example when MASTER and SLAVE-1 devices are recognized:
M S1
Example when no devices are recognized:
NONE
CASCADE SETUP
Use this to set up the cascade function.
Select
CASCADE SETUP
, and press the MULTI JOG dial to open a screen where you can change the cascade function settings.
When on
APPLY
in the last line, press the MULTI JOG dial to confirm the changed settings and return to the Menu Screen.
Press the EXIT [PEAK CLEAR] button to cancel the menu operation and return to the Menu Screen.
CASCADE MODE
This sets the cascade operation mode.
Options
OFF
(default): This disables the cascade function.
ON
: This enables the cascade function.
CASCADE ID
This sets the cascade device ID.
The cascade ID should always be set to one not used by any other device.
Option Meaning
MASTER
(default) Sets this unit as the cascade master.
SLAVE-01
Sets this unit as cascade slave 1.

Содержание

Похожие устройства

Скачать