Ariston LI 470 A [6/24] Start up and use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ariston LI 470 A [6/24] Start up and use

Ariston LI 470 A [6/24] Start up and use
6
EN
Starting the dishwasher
1. Turn the water tap on.
2. Open the door and press the ON/OFF button: the indicator
light will illuminate.
3. Measure out the detergent (see below).
4. Load the racks (see Loading the racks).
5. Select the programme by pressing the WASH CYCLE
SELECT button; the corresponding indicator light will illuminate.
6. Select the wash options (see below).
7. Start the wash cycle by shutting the door: the machine will
emit a confirmation beep.
8. At the end of the cycle two short beeps will sound and the
WASH CYCLE indicator light will flash. Open the door, switch
off the appliance by pressing the ON/OFF button, shut off the
water tap and unplug the appliance from the electricity socket.
9. Wait for a few minutes before removing the crockery, in
order to avoid burns. Unload the racks, beginning with the
lower level.
Modifying a wash cycle in progress
If a mistake was made during the wash cycle selection
process it is possible to change the cycle, provided that it has
only just begun: open the door, taking care to avoid the
escaping steam, and press the WASH CYCLE SELECT
button, holding it for 4 seconds. After one long beep and three
short beeps, the WASH CYCLE indicator light will switch off:
select the new wash cycle and start the programme by
shutting the door.
Adding extra crockery
Open the door, taking care to avoid the escaping steam, and
place the crockery inside the dishwasher. Close the door: the
cycle starts from the point at which it was interrupted.
Accidental interruptions
If the door is opened during the wash cycle, or if there is a
power cut, the cycle stops. It starts again from the point at
which it was interrupted once the door has been shut or the
electricity supply is restored.
Loading the detergent
A successful wash also depends on the correct amount of
detergent being used, as recommended by the manufacturer.
Exceeding the recommended amount does not result in a
more effective wash and pollutes the environment.
Only use detergent which has been
specifically designed for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam
residue remaining in the machine after the cycle
has ended.
To obtain the best results from each washing and
drying cycle, powder detergent, rinse aid liquid and salt
should be used.
compartment Acompartment A
compartment Acompartment A
compartment A: Washing detergent
compartment Bcompartment B
compartment Bcompartment B
compartment B: Pre-wash detergent
1. Open cover C by pressing button
D.
2. Pour in the detergent after
consulting the
Wash cycle table
:
• for powder detergent use
compartments A and B
• for tablets, when the cycle
requires 1 tablet, place it in
compartment A and close the cover;
when it requires 2, place the second tablet at the bottom of the
appliance.
3. Remove detergent residues from the edges of the
compartment and close the cover until it clicks.
A
B
D
C
Start-up and use
* Only available in selected models.

Содержание

Похожие устройства

Start up and use Starting the dishwasher 1 Turn the water tap on 2 Open the door and press the ON OFF button the indicator light will illuminate 3 Measure out the detergent see below 4 Load the racks see Loading the racks 5 Select the programme by pressing the WASH CYCLE SELECT button the corresponding indicator light will illuminate 6 Select the wash options see below 7 Start the wash cycle by shutting the door the machine will emit a confirmation beep 8 At the end of the cycle two short beeps will sound and the WASH CYCLE indicator light will flash Open the door switch off the appliance by pressing the ON OFF button shut off the water tap and unplug the appliance from the electricity socket 9 Wait for a few minutes before removing the crockery in order to avoid burns Unload the racks beginning with the lower level Modifying a wash cycle in progress If a mistake was made during the wash cycle selection process it is possible to change the cycle provided that it has only just begun open the door taking care to avoid the escaping steam and press the WASH CYCLE SELECT button holding it for 4 seconds After one long beep and three short beeps the WASH CYCLE indicator light will switch off select the new wash cycle and start the programme by shutting the door Adding extra crockery Open the door taking care to avoid the escaping steam and place the crockery inside the dishwasher Close the door the cycle starts from the point at which it was interrupted Loading the detergent A successful wash also depends on the correct amount of detergent being used as recommended by the manufacturer Exceeding the recommended amount does not result in a more effective wash and pollutes the environment 51 Only use detergent which has been specifically designed for dishwashers DO NOT USE washing up liquid 51 Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended 51 To obtain the best results from each washing and drying cycle powder detergent rinse aid liquid and salt should be used compartment A Washing detergent compartment B Pre wash detergent 1 Open cover C by pressing button D 2 Pour in the detergent after consulting the Wash cycle table for powder detergent use compartments A and B for tablets when the cycle requires 1 tablet place tin compartment A and close the cover when it requires 2 place the second tablet at the bottom of the appliance 3 Remove detergent residues from the edges of the compartment and close the cover until it clicks Accidental interruptions If the door is opened during the wash cycle or if there is a power cut the cycle stops It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored Only available in selected models

Скачать