Ariston LI 470 A [9/24] Care and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ariston LI 470 A [9/24] Care and maintenance

Ariston LI 470 A [9/24] Care and maintenance
9
EN
Shutting off the water and electricity
supplies
• Turn off the water tap after every wash cycle to
avoid leaks.
• Remove the plug from the socket when cleaning
the machine and when carrying out maintenance
work.
Cleaning the dishwasher
• The external surfaces of the machine and the
control panel may be cleaned using a non-
abrasive cloth which has been dampened with
water. Do not use solvents or abrasive products.
• Any marks on the appliance interior may be
removed using a cloth dampened with water and
a little vinegar.
Preventing unpleasant odours
• Always keep the door of the appliance ajar in
order to avoid moisture from forming and being
trapped inside the machine.
• Clean the seals around the door and detergent
dispensers regularly using a damp sponge. This
will avoid food becoming trapped in the seals,
which is the main cause of the formation of
unpleasant odours.
Cleaning the sprayer arms
Food residue may
become encrusted onto
the sprayer arms and
block the holes used to
spray the water. It is
therefore recommended
that the arms are
checked from time to
time and cleaned with a
small non-metallic
brush.
Cleaning the filters
The filters remove food residue from the water used
in the wash cycle: to obtain the best results from
each wash, they should be cleaned.
Clean the filters regularly.
After cleaning check that the filter assembly has
been replaced correctly.
The dishwasher should not be used without
filters or when the filter is loose..
1. Remove the filters by pulling the handle upwards.
2. Clean the filters:
• after every wash
cycle, remove the
largest pieces of
residue from
semicircular plate A
and glass B (these
may be removed by
pulling the handle) by
rinsing them under
running water.
• The entire filter
assembly should be
cleaned thoroughly
once a month: this
includes the
semicircular plate A,
the glass B and the
cylinder C (this may be
removed by turning it in
an anti-clockwise
direction). Use a small non-metallic brush to clean
these parts.
3. Reconstruct the filter assembly and replace it in
the correct position, following movements 1 and 2 as
shown in the figure, until it clicks into place.
Leaving the machine unused for
extended periods
• Disconnect the appliance from the electricity
supply and shut off the water tap.
• Leave the door of the appliance ajar.
• When you return, run a wash cycle when the
dishwasher is empty.
1
A
C
B
2
A
B
C
Care and maintenance

Содержание

Похожие устройства

Care and maintenance Shutting off the water and electricity supplies Turn off the water tap after every wash cycle to avoid leaks H Hotpoint ARISTON Cleaning the filters EN The filters remove food residue from the water used in the wash cycle to obtain the best results from each wash they should be cleaned Remove the plug from the socket when cleaning the machine and when carrying out maintenance work CT Clean the filters regularly Cleaning the dishwasher The dishwasher should not be used without filters or when the filter is loose The external surfaces of the machine and the control panel may be cleaned using a non abrasive cloth which has been dampened with water Do not use solvents or abrasive products After cleaning check that the filter assembly has been replaced correctly 1 Remove the filters by pulling the handle upwards 2 Clean the filters after every wash Any marks on the appliance interior may be removed using a cloth dampened with water and a little vinegar cycle remove the largest pieces of residue from semicircular plate A and glass B these may be removed by pulling the handle by rinsing them under running water Preventing unpleasant odours Always keep the door of the appliance ajar in order to avoid moisture from forming and being trapped inside the machine Clean the seals around the door and detergent dispensers regularly using a damp sponge This will avoid food becoming trapped in the seals which is the main cause of the formation of unpleasant odours Cleaning the sprayer arms Food residue may become encrusted onto the sprayer arms and block the holes used to spray the water It is therefore recommended that the arms are checked from time to time and cleaned with a small non metallic brush direction Use a small non The entire filter assembly should be cleaned thoroughly once a month this includes the semicircular plate A the glass B and the cylinder C this may be removed by turning it in an anti clockwise metallic brush to clean these parts 3 Reconstruct the filter assembly and replace it in the correct position following movements 1 and 2 as shown in the figure until it clicks into place Leaving the machine unused for extended periods Disconnect the appliance from the electricity supply and shut off the water tap Leave the door of the appliance ajar When you return run a wash cycle when the dishwasher is empty 9

Скачать