MPM MCZ-49 [7/20] Dry these elements before plugging the kettle to the mains do not operate the kettle when empty the appliance is not intended to be operated by means of an external timer or separate...



If water gets into any electric elements inside the kettle or onto the base, carefully

dry these elements before plugging the kettle to the mains.

 Do not operate the kettle when empty.

 The appliance is not intended to be operated by means of an external timer or

separate remote-control system

 Do not plug the power cord with wet hands.

 Allow the kettle to cool completely before cleaning.

APPLIANCE DESCRIPTION

1. Painted stainless steel housing

(model MCZ-49/C, MCZ-49)

2. Automatic hinged lid

3. Lid release button

4. Kettle’s holder

5. Switch (on/oﬀ)

6. Water level indicator with scale

7. Rotating base 360

8. Replaceable ﬁlter

Capacity min/max 0,5/1,7 l

Illuminated kettle interior

Concealed heating element

BEFORE USE

1. The kettle should be placed upright

of ﬂat, stable and dry surfaces .

2. Prior to the ﬁrst use, ﬁll the kettle with

water to max level, boil it, then empty and rinse with fresh water. Repeat it few times to re-

move production dust, etc.

3. The kettle will turn oﬀ automatically after water boiling. However it may be turned oﬀ by the

user at any time by moving the “on/oﬀ” switch to the oﬀ position, if necessary.

4. After water has been boiled or the kettle has been switched oﬀ, wait several seconds before

switching it on again.

5. The empty kettle will be automatically turned oﬀ by its overheating protection system. In

such case the kettle should be allowed to cool for 15 minutes before its reﬁlling.

HOW TO USE THE KETTLE

1. Remove the kettle from its base before ﬁlling it with water (7).

2. Open the kettle’s cover pushing the (3) button, pour water to a desired level (however,

not less than 0,5 l and do not exceed the level of 1,7 l).

3. Pushing the button close the cover (2) accurately.

4. Place the kettle on the base (7).