Qtech QSW-3200-28T [125/136] Cfm traceroute

+7(495) 797-3311www.qtech.ru

Москва, Новозаводская ул., 18, стр. 1

114

5 packets transmitted, 5 packets received, 0.0% packet loss

18.2.9 Cfm traceroute

cfm traceroute command is used for link tracert and checking network connection. Configure it

in global configuration mode:

cfm traceroute [-f first_ttl | -h maximum_hops | -w time_out ] target-mac level level-id vlan

vlan-id

Parameter:

first_ttl: first ttl of sending packet which is in the range of 1 to 255 and default value is 255;

maximum_hops: max ttl of sending packet which is in the range of 1 to 255 and default value

is 10;

time_out: the response timeout after sending packet which is in the range of 10 to 60 with the

unit of second and default value is 5 seconds;

target_mac: destination mac address

level-id: the integrity from 0-7

vlan-id: VLAN to be tracerted

For example:

! cfm traceroute 00:1f:ce:00:08:04 level 4 vlan 110

QTECH#cfm traceroute 00:1f:ce:00:08:04 level 4 vlan 110

18.2.10 Display cfm domain

Configure it in any configuration mode:

It will display as following:

 cfm domain name

 cfm domain level

show cfm domain

For example:

! Display cfm domain

QTECH(config)#show cfm domain

18.2.11 Display cfm maintenance-points local

Configure it in any configuration mode:

It will display as following:

 cfm maintenance-points mpid

 cfm maintenance-points type

 cfm maintenance-points vlan

 cfm maintenance-points level

 cfm maintenance-points interface

 Enable/disable cfm maintenance-points

 cfm maintenance-points mac address

show cfm maintenance-points local

For example:

! Display cfm maintenance-points local

QTECH(config)# show cfm maintenance-points local