Qtech QSW-3200-28T [33/136] Enable disable port alarm globally

+7(495) 797-3311www.qtech.ru

Москва, Новозаводская ул., 18, стр. 1

 Enable/disable port alarm on the port

 Configure the exceed threshold and normal threshold of port alarm

 Display port alarm

2.6.3 Enable/disable port alarm globally

Please configure it in global configuration mode:

 Enable port alarm globally

alarm all-packets

 Disable port alarm globally

no alarm all-packets

By default, alarm all-packets enable.

For example:

! Enable global alarm all-packets

QTECH(config)#alarm all-packets

2.6.4 Enable/disable port alarm on the port

Please configure it in interface configuration mode:

 Enable port alarm on the port

alarm all-packets

 Disable port alarm on the port

no alarm all-packets

For example:

! Enable alarm all-packets of Ethernet 0/0/8

QTECH(config-if-ethernet-0/0/8)# alarm all-packets

2.6.5 Configure the exceed threshold and normal threshold of port

alarm

Please configure it in global configuration mode:

 Configure the exceed threshold and normal threshold of port alarm

alarm all-packets threshold [ exeed exceed ] [ normal normal ]

Caution: Exceed > normal. By default, 100 BASE exceed threshold is 850Mbps and normal

threshold is 600Mbps. 10GE interface exceed threshold is 8500Mbps and normal threshold is

6000Mbps.

For example:

! Configure alarm all-packets exceed threshold to be 500,and normal threshold to be 300

QTECH(config)#alarm all-packets threshold exceed 500 normal 300

2.6.6 Display port alarm

 Input following command in any configuration mode to display global interface alarm:

show alarm all-packets

For example:

! Display global alarm all-packets information

QTECH(config)#show alarm all-packets interface ethernet 0/0/1

 Input following command in any configuration mode to display interface alarm on the port:

show alarm all-packets interface [ interface-list ]