Qtech QSW-8200-28T-AC-DC [26/36] Debug ulpp flush send receive interface

User Manual

Chapter 4. Commands for ULPP 26

www.qtech.ru

4.6 debug ulpp flush {send | receive} interface

 Command: debug ulpp flush {send | receive} interface <name>

 no debug ulpp flush {send | receive} interface <name>

 Function: Show the information of the receiving/sending flush packets, it only shows

the receiving packets, but do not show the detailed contents of the packets. The no

operation disables the shown information.

 Parameter: <name> is the name of the port.

 Default: Do not display.

 Command mode: Admin mode.

 Usage Guide: None.

 Example: Show the information that send the flush packets for the port1/0/1.

 Switch# debug ulpp flush send interface e1/0/1

 Flush packet send on port Ethernet 1/0/1.

4.7 description

 Command: description <string>

 no description

 Function: Configure the description character string of ULPP group. The no command

deletes the description.

 Parameter: <string> is the name of ULPP group, the max number of the characters is

128.

 Default: Do not configure ULPP name by default.

 Command mode: ULPP group configuration mode.

 Usage Guide: None.

 Example: Configure the description of ULPP group as qtech.

 Switch(config)# ulpp group 20

 Switch(ulpp-group-20)# description qtech

4.8 flush disable arp

 Command: flush disable arp

 Function: Disable sending the flush packets of deleting ARP.

 Parameter: None.

 Default: By default, enable the sending function of the flush packets which are deleted

by ARP.

 Command mode: ULPP group configuration mode.

 Usage Guide: If configure this command, when the link is switched, it will not actively

send the flush packets to notify the upstream device to delete the entries of ARP.

 Example: Disable sending the flush packets of deleting ARP.

 Switch(config)# ulpp group 20