Qtech QSW-8200-28T-AC-DC [36/36] Ulsm group uplink downlink

User Manual

Chapter 5. Commands for ULSM 36

www.qtech.ru

 Command mode: Global Mode.

 Usage Guide: None.

 Example: Create ULSM group 10.

 Switch(config)# ulsm group 10

5.4 ulsm group {uplink | downlink}

 Command: ulsm group <group-id> {uplink | downlink}

 no ulsm group <group-id>

 Function: Configure the uplink/downlink ports of ULSM group. The no command

deletes the uplink/downlink ports.

 Parameter: <group-id>: The ID of ULSM group, the range from 1 to 32.

 uplink: Configure the port as the uplink port.

 downlink: Configure the port as the downlink port.

 Default: The port does not belong to any ULSM group.

 Command mode: Port Mode.

 Usage Guide: Configure the uplink/downlink ports of ULSM group. Each ULSM group

can configure 8 uplink ports and 16 downlink ports at most.

 Example: Configure port1/0/3 as the uplink port of ULSM group10.

 Switch(config)# interface ethernet 1/0/3

 Switch(config-If-Ethernet1/0/3)# ulsm group 10 uplink