Qtech QSW-8200-28T-AC-DC [32/36] Ulpp flush disable mac vlan

User Manual

Chapter 4. Commands for ULPP 32

www.qtech.ru

 Parameter: None.

 Default: By default, disable receiving the flush packets of updating MAC address.

 Command mode: Port mode.

 Usage Guide: If this command is configured, then it will not receive the flush packets of

updating MAC address.

 Example: Disable receiving the flush packets of updating MAC address.

 Switch(config)# interface ethernet 1/0/1

 Switch(config-If-Ethernet1/0/1)# ulpp flush disable mac

4.23 ulpp flush disable mac-vlan

 Command: ulpp flush disable mac-vlan

 Function: Disable receiving the flush packets of mac-vlan type.

 Parameter: None.

 Default: Disable.

 Command mode: Port mode.

 Usage Guide: If enabling this function, forward the hardware of the flush packets with

mac-vlan type received in port. It will not be analyzed.

 Example: Disable receiving the flush packets deleted by mac-vlan of port.

 Switch(config)#interface e1/0/2

 Switch(config-if-ethernet1/0/2)#ulpp flush disable mac-vlan

4.24 ulpp flush enable arp

 Command: ulpp flush enable arp

 Function: Enable receiving the flush packets of deleting ARP.

 Parameter: None.

 Default: By default, disable receiving the flush packets of deleting ARP.

 Command mode: Port mode.

 Usage Guide: Enable this function to receive the flush packets which delete ARP.

 Example: Enable receiving of the flush packets of deleting ARP.

 Switch(config)# interface ethernet 1/0/1

 Switch(config-If-Ethernet1/0/1)# ulpp flush enable arp

4.25 ulpp flush enable mac

 Command: ulpp flush enable mac

 Function: Enable receiving the flush packets of updating MAC address.

 Parameter: None.

 Default: By default, disable receiving the flush packets of updating MAC address.

 Command mode: Port mode.