Home
Главная
Moser
Машинка Для Стрижки
ChromStyle white
Инструкция по эксплуатации Страница: 12

Moser ChromStyle white [12/94] English

ENGLISH

· When the speed of the battery audibly begins to slow down, the battery has a remaining capac-

ity of approx. 2 - 3 minutes. Charging the battery.

· When the battery has fully run down, the machine will switch itself off automatically.

Note: In case of insufficient maintenance of the blade set, the operating time can be reduced

considerably.

Cutting-length adjustment

The cutting length can be adjusted to between 0.7 mm and 3 mm (5 possible positions) using the

cutting-length adjustment integrated into the blade set (Fig. 4). To do this, set the adjustment lever

to the desired position and let it snap into place.

Cutting with attachment combs

The appliance can also be operated with attachment combs. In order to achieve the indicated

cutting length, the cutting length adjustment lever should be set to position 1 (Fig. 4). The follow-

ing attachment combs are included as standard: 3 mm, 6 mm, 9 mm and 12 mm cutting lengths.

Attachment combs with 18 mm and 25 mm cutting length are available as optional accessories.

Attaching/removing the attachment comb

· Slide the attachment comb on to the blade set in the direction of the arrow until it reaches the

limit stop (Fig. 5a).

· The attachment comb can be removed by pushing it in the direction of the arrow (Fig. 5b).

Cleaning and Care

· Do not immerse the appliance in water!

· After each use, remove the attachment comb and use the cleaning brush to remove cut hairs

from the housing opening and from the blade set. To do this, remove the blade set (Fig. 6a)

and press the cleaning lever (Fig. 7). This allows the cut hairs that accumulate between the bot-

tom blade and the top blade to be easily removed using the cleaning brush (

EASY CLEANING).

· The charging contacts on the appliance and charging stand should always be kept clean.

· Only wipe the appliance with a soft cloth, which may be dampened slightly. Do not use solvents

or abrasives!

· The blade set can be cleaned with hygienic spray, order no. 4005-7051. Do not use any other

cleaning agents.

· For a long-lasting, good cutting performance, it is important to oil the blade set frequently

(Fig. 8). Use only blade set oil for this purpose, order no. 1854-7935 (200 ml).

· Blade set oil and hygienic spray is available from your dealer or our Service Centre.

· If the cutting performance deteriorates after long use despite regular cleaning and oiling, the

blade set should be replaced.

Automatic Sensor System

To ensure that your new hair cutting appliance enjoys a long service life, the appliance needs to be

cleaned and oiled on a regular basis (see section

Cleaning and Care in the user instructions). To

give you advance notice of an urgent need for maintenance care, your hair cutting appliance has

been equipped with an automatic sensor system. This system automatically recognises when the

blade set needs oiling or cleaning. Consistent heavy soiling or lack of oil can lead to early wear

and tear of the appliance.

Содержание

Похожие устройства

ENGLISH en When the speed of the battery audtiy begins to slow down the battery has a remaining capac ity of approx 2 3 minutes Charging the battery When the battery has fuly run down the machine wil switch itself off automatically Note In case of insufficient maintenance of the blade set the operating tine can be reduced consderably Cutting length adjustment The cutting length can be adjusted to between 0 7 mm and 3 mm 5 possible positions using the cutting length atjustment integrated into the blade set Fig 4 To do this set the adjustment lever to the desired position and let it snap into place Cutting with attachment combs The appliance can also be operated with attachment combs In Oder to achieve the rdcated cutting length the cutting length ac ustmernt lever should be set to position 1 Fig 4 The fdlowing attachment combs are induded as standard 3 mm 6 mm 9 mm and 12 mm cutting lengths Attachment combs with 18 mm and 25 mm cutting length are available as cpticnai accessories Attach ngfremoving the attachment comb Side the attachment ccmb on to the Made set n the drecticn of the arrow until it reaches the limit stop Fig 5a The attachment comb can be removed by pushing it in the drecticn of the arrow Rg Eb Cleaning and Care Do not immerse the appliance in water After each use remove the attachment comb and use the cleaning brush to remove cut hairs from the housing cpenng and iron the blade set To do this remove the blade set Rg 6a and press the deaning lever Rg 7 This alows the cut hars that accumulate between the bot tom Wade and the top blade to be easiy removed using the cleaning brush EASY CLEANING The charging contacts cn the appliance and charging stand should always be kept dean Only wpe the appliance with a soft doth which may be dampened slightly Do not use solvents a abrasives The Made set can be deaned with hygienic spray order no 4005 7051 Do not use any other cleaning agents For a lang lasting good cutting performance it is important to dl the Made set frequently Rg 8 Use only Made set dl for this purpose ader no 1854 7935 200 ml Blade set oi and hygienic spray ts available from your dealer a our Service Centre If the cutting performance deteriorates after lang use despte regular deaning and oiing the blade set should be replaced Automatic Sensor System To ensue that your new hair cutting appliance enjoys a lang service life the appiance needs to be deaned and oled an a regular bass see section Cleaning and Care in the usa instructions To give you advance notice of an urgent need for maintenance care you har cutting appiance has been equipped with an automatic sensor system This system automatically recognises when the blade set needs oiing or deaning Consistent heavy sdling a lack of dl can lead to early wear and tea of the appliance 12

Скачать