Beurer LW 110 [16/64] What if there are problems

16

Cleaning the fan unit

Youcanwipethefanunitwithadampcloth.However,makesurethatnoliquidentersthefanunit.

Cleaning the upper cover

Remove the fan unit to more easily clean the upper cover. To do so,

slide the 4 locks to the outside and remove the fan unit.

Important: When putting the fan unit down, ensure that it does not

come to rest on the water level sensor.

Cleaning the humidification discs and tub

spacebyremovingthecutlerybasket,forexample.The

humidification discs and tub must not be bent or jammed

when being placed in the dishwasher.

Setthedishwashertoagentlecycle(forcleaningglass)andifpossibleremovethepartbeforethedrying

process.Thecyclemustnotexceedatemperatureof50°C–otherwisetheplasticpartsmaydeform.

Onlycontinuetousethedevicewhentheexteriorofthetubiscompletelydry.

Clean the water level sensor

Youcancleanthelowerhalfofthewaterlevelsensorinacleaningbath(e.g.BeurerAntical).Ensurethatthe

upperhalfofthewaterlevelsensorisnotexposedtoanyharshcleaningproducts.Thewaterlevelsensor

must not be cleaned in the dishwasher.

weigheddownbyadditionalitems.

Problem Cause Solution

Nodisplay. Thedeviceisnotconnectedto

mainspowersupply.

Connect the mains plug and switch

onthedevice.

Nodisplay. Thedevicehasswitcheditselfoff

duetosafetyreasons.

Cleanandrefillthedevicebeforenext

use. Then switch it on again.

Theuppercovercannot

befittedprecisely.

The guide rails do not fit and the

uppercoverisjammed.

Turntheuppercoveraroundby180°

and reposition it on the tub.