SENA 10UPAD [17/48] Pairing the 10upad with bluetooth devices

10Upad

English

5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth

Stereo Device

1. Press and hold the Center Button for 10 seconds until you hear a

voice prompt, “Conguration menu”.

2. Tap the (+) Button until you hear a voice prompt, “Phone pairing”.

3. Search for Bluetooth devices on your mobile phone. Select the

Sena 10Upad in the list of the devices detected on the mobile

phone.

4. Enter 0000 for the PIN. Some mobile phones may not ask for the

PIN.

5. The mobile phone conrms that pairing has been completed and

the 10Upad is ready to use. You will hear a voice prompt, “Your

headset is paired”.

6. If the pairing process is not completed within three minutes, the

10Upad will return to stand-by mode.

Note:

1. If a Bluetooth connection between the headset and a mobile phone is

disconnected, press the Center Button for 3 seconds until you hear a

high tone single beep to recover the Bluetooth connection immediately.

2. If the Bluetooth connection between the headset and a media player is

disconnected, press the Center Button for 1 second to recover the

Bluetooth connection and play.

5 PAIRING THE 10Upad WITH BLUETOOTH

DEVICES

Before using the 10Upad Bluetooth headset with any other Bluetooth

devices for the rst time, you will need to pair them together. You can

pair the 10Upad with Bluetooth mobile phones, Bluetooth stereo

devices such as MP3 players, or motorcycle specic Bluetooth GPS

navigation, and with other Sena Bluetooth headsets. The pairing

operation is required only once for each Bluetooth device. The headset

remains paired with the devices and automatically reconnects to them

when they are within range. You will hear a high toned single beep and

a voice prompt whenever the headset reconnects to the paired device:

“Phone connected” to a mobile phone, “Media connected” to a

Bluetooth stereo device.