SENA 10UPAD [44/48] Remote control

10Upad

* Two audio sources in the foreground can be heard simultaneously with the

same volume level.

** Only one background source can be heard at a time while listening to an

audio source in the foreground.

A. GPS instructions can be heard during phone calls and the volume level of

both audio sources can be adjusted using the headset.

B. GPS app directions will be heard in the background during intercom

conversations.

C. The FM radio will be heard in the background when GPS instructions are

heard.

Note:

1. Audio Multitasking will be activated during two-way intercom

conversations with a headset that also supports this feature.

2. When Audio Multitasking is disabled, the background audio source will

return to its independent volume level.

3. For Audio Multitasking to work properly, you need to power the headset

off and on. Please restart the headset.

4. Some GPS devices may not support this feature.

14.2.13 Background Volume (Default: Level 5)

The Background Volume can be adjustable only when the Audio

Multitasking turns on. Level 9 is the highest volume and 0 is the lowest.

15 REMOTE CONTROL

You can remotely control the 10Upad via Bluetooth using the Remote

Control (sold separately). This eliminates the need to take off your

hand for button operations. Your 10Upad and the Remote Control must

be paired together before use.

1. Turn on the 10Upad and the Remote Control.

2. Press the Center Button for 10 seconds to enter the conguration

menu. Tap the (+) Button until you hear a voice prompt saying,

“Remote control pairing”. Press the Center Button to enter into

Remote Control Pairing mode and the red LED will ash rapidly

and you will hear multiple beeps.

3. Enter Bluetooth pairing mode on your Remote Control. The

10Upad will automatically perform pairing with the Remote Control

in pairing mode. You will hear a voice prompt, “Remote control

connected”, when they are successfully connected.