SENA 10UPAD Инструкция по эксплуатации онлайн [23/48] 495199

10Upad

English

6. If you want to exit the speed dial immediately, tap the (+) Button

or the (-) Button until you hear a voice prompt saying “Cancel”,

and tap the Center Button. If you do not press any button within

15 seconds, the 10Upad will exit the voice speed dial menu and

go back to stand-by mode.

Note:

1. Make sure that you connect the mobile phone and the headset to use the

speed dial function.

2. You need to assign speed dial numbers before using the speed dial

(please refer to section 14.2.1, “Speed Dial”).

6.3 GPS Navigation

6.3.1 GPS Pairing

1. Press and hold the Center Button for 10 seconds until you will

hear a voice prompt saying “Conguration menu”.

2. Tap the (+) Button until you will hear a voice prompt saying “GPS

pairing”.

3. Search for Bluetooth devices on the GPS navigation. Select the

Sena 10Upad in the list of the devices detected on the GPS.

4. Enter 0000 for the PIN.

Note:

When Audio Multitasking is enabled, if you pair your GPS device via GPS

Pairing, its instructions will not interrupt your intercom conversations, but

will overlay with them.

6.4 Sena SR10, Two-Way Radio Adapter

You can use a two-way radio and the 10Upad Bluetooth intercom

simultaneously by using the Sena SR10, a Bluetooth Two-way Radio

Adapter (please refer to

section 5.2, “Second Mobile Phone Pairing -

Second Mobile Phone, GPS, and SR10”

). Incoming audio from the

two-way radio will not interrupt an intercom conversation but is heard

in the background. This is useful when you have an intercom

conversation with a passenger on the back seat and use a two-way

radio for group communication with other motorcycle riders.