SENA 10UPAD Инструкция по эксплуатации онлайн [32/48] 495199

10Upad

11.1 Universal Intercom Pairing

The 10Upad can be paired with non-Sena Bluetooth headsets for

Bluetooth intercom conversation. You can pair the 10Upad with only

one non-Sena Bluetooth headset so if you pair with a different non-

Sena Bluetooth headset, the previous pairing will be removed.

1. Turn on the 10Upad and a non-Sena Bluetooth headset that you

want to pair with.

2. Press and hold the Center Button for 10 seconds to enter the

conguration menu. Tap the (+) Button or the (-) Button until you

hear a voice prompt, “Universal intercom pairing”. Tap the

Center Button to enter into Universal Intercom Pairing mode and

the blue LED will ash rapidly and you will hear multiple beeps.

3. Perform the operation required for handsfree pairing on the

non-Sena Bluetooth headset (refer to

the User’s Manual for the

headsets

you want to use). The 10Upad will automatically pair

with a non-Sena Bluetooth headset when each are in pairing

mode.

11.2 Two-way Universal Intercom

You can initiate the Universal Intercom connection with non-Sena

Bluetooth headsets using the same intercom connection method as

you would between other Sena headsets. You may single tap the

Center Button to begin an intercom conversation with the rst intercom

friend, double tap with the second intercom friend, and triple tap with

the third intercom friend.

Non-Sena Bluetooth headsets may initiate the Universal Intercom

connection, by activating the voice dialer or using the redialing

operation. You may also disconnect the existing connection by using

the operation to end a call (refer to

the user's manual for the headsets

for voice dialer, redialing, and ending a call).