Hitachi CH18DS-LR4 без АКБ [17/116] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi CH18DS-LR4 без АКБ [17/116] English

Hitachi CH18DS-LR4 без АКБ [17/116] English
English
16
Tool The tool does not trim well. The blade stopped because it was
used to cut a branch whose width
exceeded the blade’s cutting
capacity.
NOTE
Work that will repeatedly cause
the blade to stop will eventually
damage the motor.
Some garden trees have wood that
is very hard and may be beyond
the capacity of the tool even if it is
of a width that is within normal
capacity. Use a pair of pruning
shear to remove thick branches
before starting work.
An oblique cut may also exceed
the capacity of the tool since the
length of the cut increases. Be sure
to trim thick branches at right
angles.
Symptom Possible cause Remedy
Important notice on the batteries for the Hitachi
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when
used with batteries other than these designated
by us, or when the battery is disassembled and
modified (such as disassembly and replacement
of cells or other internal parts).
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a Hitachi Authorized Service Center.
NOTE
Due to HITACHI’s continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level:
79 dB (A) (CH14DSL/CH14DL)
80 dB (A) (CH18DSL/CH18DL)
Measured A-weighted sound pressure level:
68 dB (A) (CH14DSL/CH14DL)
69 dB (A) (CH18DSL/CH18DL)
Uncertainty KpA: 3 dB (A).
Wear ear protection.
Vibration total values (triax vector sum) determined
according to EN60745.
No load:
a
h
= 2.3 m/s
2
, Uncertainty K = 1.5 m/s
2
(CH14DSL/CH14DL)
a
h
= 2.2 m/s
2
, Uncertainty K = 1.5 m/s
2
(CH18DSL/CH18DL)
The declared vibration total value has been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
WARNING
䡬 The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used.
䡬 Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
01Eng_CH14DSL_EE 10/27/10, 1:20 PM16

Содержание

Похожие устройства

English Symptom Tool The tool does not trim well Possible cause The blade stopped because it was used to cut a branch whose width exceeded the blade s cutting capacity NOTE Work that will repeatedly cause the blade to stop will eventually damage the motor Important notice on the batteries for the Hitachi cordless power tools Please always use one of our designated genuine batteries We cannot guarantee the safety and performance of our cordless power tool when used with batteries other than these designated by us or when the battery is disassembled and modified such as disassembly and replacement of cells or other internal parts GUARANTEE We guarantee Hitachi Power Tools in accordance with statutory country specific regulation This guarantee does not cover defects or damage due to misuse abuse or normal wear and tear In case of complaint please send the Power Tool undismantled with the GUARANTEE CERTIFICATE found at the end of this Handling instruction to a Hitachi Authorized Service Center NOTE Due to HITACHI S continuing program development the specifications herein change without prior notice of research and are subject to Remedy Some garden trees have wood that is very hard and may be beyond the capacity of the tool even if it is of a width that is within normal capacity Use a pair of pruning shear to remove thick branches before starting work An oblique cut may also exceed the capacity of the tool since the length of the cut increases Be sure to trim thick branches at right angles Information concerning airborne noise and vibration The measured values were determined according to EN60745 and declared in accordance with ISO 4871 Measured A weighted sound power level 79 dB A CH14DSL CH14DL 80 dB A CH18DSL CH18DL Measured A weighted sound pressure level 68 dB A CH14DSL CH14DL 69 dB A CH18DSL CH18DL Uncertainty KpA 3 dB A Wea r ea r protection Vibration total values triax vector sum determined according to EN60745 No load ah 2 3m s Uncertainty K 1 5 m s CH14DSI_ CH14DL ah 2 2 m s2 Uncertainty K 1 5m s CH18DSL7CH18DL The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another It may also be used in a preliminary assessment of exposure WARNING O The vibration emission during actual use of the power tool candifferfrom the declared total value depending on the ways in which the tool is used O Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time 16

Скачать