AXIOMET AX-160IP [21/30] Connect the test leads tip in parallel with the circuit to be measured and don t touch any electrical conductors 5 touch mvhz key 11 again to exit

4. Connect the test leads tip in parallel with the circuit to be measured.

And don’t touch any electrical conductors.

5. Touch mvHz key 11 again to exit.

NOTE:

In noisy environment, it is preferable to use shield cable for measuring small signal

3.2.7. Temperature measurement

To avoid electrical shock and/or damage to the instrument, do not apply more than 250Vdc or

220Vac rms between the °C terminal and the COM terminal.

To avoid electrical shock, do not use this instrument when voltages at the measurement surface

exceed 60v dc or 24v rms. Ac.

To avoid damage or burns. Do not make temperature measurement in microwave ovens.