AXIOMET AX-903 Расширенная инструкция онлайн [4/6] 528182

2. Press the laser key and hold the “On” button; then the laser line will always be on.

3. Keep holding “On” button during the stud detection.

ILLUSTRATION 2

USAGE

Detecting Wood Studs

Wood Stud detection is set by default when the unit is on.

1. Slide the unit across the surface in a straight line. The closer the unit is to the stud the more bars

will be shown, as illustration 2. When the stud edge is detected the Wood indicator and the edge

bar will be shown, as illustration 3 and the unit will sound a repeating beep.

2. Use the indicator line to mark the stud edge.

3. Continue sliding past the stud. When the indicator turns off and the unit stops beeping, the other

edge has been detected.

4. Double check stud location by coming back from the other direction. Make additional markings.

5. The midpoint of the marks indicates the stud center

ILLUSTRATION 3

Detecting Metal Studs

1. Press “Metal” button once and the LCD will be as shown. Press & keep holding the “On” button all

the time during the stud detection

2. Repeat the procedures 1-5 as described in” Detecting Wood Stud”.