Gigabyte Z390 GAMING X [32/48] Administrator password

& Other PCI devices

 AllowsyoutoselectwhethertoenabletheUEFIorLegacyoptionROMforthePCIdevicecontrollerother

than the LAN, storage device, and graphics controllers.

Donotlaunch  DisablesoptionROM.

UEFI    EnablesUEFIoptionROMonly.(Default)

Legacy   EnableslegacyoptionROMonly.

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

& Administrator Password

 Allowsyoutocongureanadministratorpassword.Press<Enter>onthisitem,typethepassword,and

thenpress<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress

<Enter>.Youmustentertheadministratorpassword(oruserpassword)atsystemstartupandwhenentering

BIOSSetup.Differingfromtheuserpassword,theadministratorpasswordallowsyoutomakechangesto

all BIOS settings.

& User Password

 Allowsyoutocongureauserpassword.Press<Enter>onthisitem,typethepassword,andthenpress

<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress<Enter>.

You must enter the administrator password (or user password) at system startup and when entering BIOS

Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.

 Tocancelthepassword,press<Enter>onthepassworditemandwhenrequestedforthepassword,enter

thecorrectonerst.Whenpromptedforanewpassword,press<Enter>withoutenteringanypassword.

Press<Enter>againwhenpromptedtoconrm.

 NOTE:BeforesettingtheUserPassword,besuretosettheAdministratorPasswordrst.

& Secure Boot

 AllowsyoutoenableordisableSecureBootandcongurerelatedsettings.Thisitemiscongurableonly

when CSM Support is set to Disabled.

- 32 -