Home
Главная
Gigabyte
Материнская Плата
Z390 GAMING X
Инструкция Страница: 42

Gigabyte Z390 GAMING X [42/48] Memory

3-2 Installing an Intel

Optane

™

Memory

System Requirements

1. Intel

Optane

™

memory

2. The Optane

™

memory must have at least 16 GB capacity, and it must have equal or smaller capacity than

theharddrive/SSDtobeaccelerated.

3. The Optane

™

memorycannotbeusedtoaccelerateanexistingRAIDarray;theacceleratedharddrive/SSD

cannotbeincludedinaRAIDarray.

4. Theharddrive/SSDtobeacceleratedmustbeaSATAharddriveorM.2SATASSD.

5. Theharddrive/SSDtobeacceleratedcanbeasystemdriveordatadrive.ThesystemdrivemustbeGPT

formatted and have Windows 10 64-bit (or later version) installed on it. The data drive must also be GPT

formatted.

6. The motherboard driver disk

Installation Guidelines

A-1: Installation in AHCI mode

IftheSATAcontrollerhasbeenconguredinAHCImode,pleasefollowthestepsbelow:

1. After entering the operating system, insert the motherboard driver disk into your optical drive. On the Xpress

Install screen, select Intel(R) Optane(TM) Memory System Acceleration

(Note)

to install. Follow the on-screen

instructions to continue. When completed, restart the system.

2. After re-entering the operating system, follow the on-screen instructions to complete the settings, and then the

Intel

Optane

™

Memory application will appear automatically. If you install more than one Optane

™

memory,

please select which one you are going to use. Then select which drive to be accelerated. Click Enable. All

data on the Optane

™

memory will be erased. Make sure you back up the data before continuing. Follow the

on-screen instructions to proceed. When completed, restart the system.

3. Launch the Intel

Optane

™

Memory application from the Start menu and make sure the Intel

Optane

™

Memory has been enabled. (The SATA controller mode is changed to Intel RST Premium With Intel Optane

System AccelerationfromAHCImode.DONOTchangeyourSATAcontrollermodebacktoAHCI.Doing

so will cause the Optane

™

memory unable to function properly.)

4. Ifyouwanttoacceleratethesystemdrive,youcanselectspecicfolders,les,orapplicationstoaccelerate

using the Intel

Optane

™

Memory Pinning function. (The Optane

™

memory used must have at least 32

GB capacity.)

(Note) If the system already has Intel

RapidStorageTechnologyutilityinstalled,youhavetoremoveitrst

beforeinstallingtheIntel(R)Optane(TM)MemorySystemAccelerationapplication.

Install the SATA RAID/AHCI driver and operating system

With the correct BIOS settings, you are ready to install the operating system.

Installing the Operating System

As some operating systems already include Intel

RAID/AHCIdriver,youdonotneedtoinstallseparateRAID/

AHCI driver during the Windows installation process. After the operating system is installed, we recommend

thatyouinstallallrequireddriversfromthemotherboarddriverdiskusing"XpressInstall"toensuresystem

performance and compatibility. If the operating system to be installed requires that you provide additional SATA

RAID/AHCIdriverduringtheOSinstallationprocess,pleaserefertothestepsbelow:

1. Copy the IRST folder under \Boot in the driver disk to your USB thumb drive.

2. Boot from the Windows setup disk and perform standard OS installation steps. When the screen requesting

you to load the driver appears, select Browse.

3. ThenbrowsetotheUSBashdriveandselectthelocationofthedriver.Thelocationofthedriverisas

follows:\IRST\f6py-x64

4. When a screen as shown, select Intel Chipset SATA RAID Controller and click Next to load the driver and

continue the OS installation.

- 42 -

Gigabyte Z390 GAMING X [42/48] Memory

Содержание

Похожие устройства