Fluke FLK-I410 Расширенная инструкция онлайн

I410/i1010

English

Panel 1

i410/i1010

AC/DC Current Clamp

Instruction Sheet

Safety Information

XW Read First: Safety Information

To ensure safe operation and service of the

current clamp, follow these instructions:

• Read all operating instructions before use and follow all

safety instructions.

• Use the Current Clamp only as specified in the

operating instructions, otherwise the clamp’s safety

features may not protect you.

• Adhere to local and national safety codes. Individual

protective equipment must be used to prevent shock

and arc blast injury where hazardous live conductors

are exposed.

• Do not hold the Current Clamp anywhere beyond the

tactile barrier. See Features and Connections.

• Before each use, inspect the Current Clamp. Look for

cracks or missing portions of the clamp housing or

output cable insulation. Also look for loose or weakened

components. Pay particular attention to the insulation

surrounding the jaws.

• Never use the clamp on a circuit with voltages higher

than 600 V (CAT. III) or a frequency higher than 400 Hz

(i410) or 2 kHz (i1010).

• CAT III equipment is designed to protect against

transients in equipment in fixed equipment

installations, such as distribution panels, feeders and

short branch circuits, and lighting systems in large

buildings.

• Use extreme caution when working around bare

conductors or bus bars. Contact with the conductor

could result in electric shock.

• Use caution when working with voltages above 60 V dc,

30 V ac rms or 42 V ac peak. Such voltages pose a

shock hazard.

PN 617677 September 1996, Rev.2, 6/05