Canton DM 90.3 [27/35] Automatic selection of bt input sel
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Canton DM 90.3 [27/35] Automatic selection of bt input sel

Canton DM 90.3 [27/35] Automatic selection of bt input sel
52
53
1
With the device switched on, press and hold the “Play Mode” key for more
than 3 seconds, until
AUT
appears on the display.
2
Press the “Play Mode” key again briefly, until
ECO
appears on the display.
3
Press the “Volume +” key to activate the function (ON).
4
Press the “Volume –“ key to deactivate the function (OFF).
5
Exit the menu by again pressing and holding the “Play Mode” key for more
than 3 seconds. If no input has appeared within 10 seconds the device will
automatically exit the configuration menu.
Eco Standby (ECO)
When this function is activated (ON), the device automatically goes into standby mode if no signal is detected on the selected input for one
hour. When this function is deactivated (OFF), the DM system has to be switched off manually.
The device is supplied with this function activated (ON).
To activate/deactivate this function proceed with the following steps:
Comment: This function is automatically deactivated if the AUT or CEC function is activated.
Automatic selection of BT input (SEL)
When this function is activated (AUT), the DM system automatically switches to the BT input when it detects an audio signal from a mobile
device. When this function is deactivated (MAN) the input must be selected manually.
The device is supplied with this function deactivated (MAN).
To activate/deactivate this function proceed with the following steps:
Comment: Depending on the used mobile device the DM system can also be switched to the BT input by typing a message or by sound of
other system tones, if the SEL function is activated (AUT).
When the SEL function is activated (AUT) the BT input can no longer be selected using the “Input” key. In this mode the DM system can be
connected to the mobile device regardless of the selected signal input.
1
With the device switched on, press and hold the “Play Mode” key for more
than 3 seconds, until
AUT
appears on the display.
2
Press the “Play Mode” key again briefly, until
SEL
appears on the display.
3
Press the “Volume +” key to activate the function (AUT).
4
Press the “Volume –“ key to deactivate the function (MAN).
5
Exit the menu by again pressing and holding the “Play Mode” key for more
than 3 seconds. If no input has appeared within 10 seconds the device will
automatically exit the configuration menu.
EnglishEnglish

Содержание

Похожие устройства

Скачать