ASRock Fatal1ty X99X Killer Краткая инструкция онлайн

Version 1.0
Published August 2014
Copyright©2014 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
Содержание
- California usa only 1
- Copyright notice 1
- Disclaimer 1
- English 1
- Fatal1ty story 3
- Going pro 3
- Winning streak 3
- A dream 4
- Livin large 4
- English 5
- Fatal ty 5
- Fatal1ty x99x killer series 5
- Motherboard layout 5
- English 6
- English 7
- Fatal1ty x99x killer series 7
- English 8
- I o panel 8
- English 9
- Fatal1ty x99x killer series 9
- Chapter 1 introduction 10
- English 10
- Package contents 10
- Chipset 11
- English 11
- Expansion slot 11
- Fatal1ty x99x killer series 11
- Memory 11
- Platform 11
- Speciications 11
- English 12
- Rear panel i o 12
- Connector 13
- English 13
- Fatal1ty x99x killer series 13
- Storage 13
- Bios feature 14
- Certiica tions 14
- English 14
- Hardware monitor 14
- Chapter 2 installation 15
- English 15
- Fatal1ty x99x killer series 15
- Pre installation precautions 15
- Caution please note that x99 platform is only compatible with the lga 2011 3 socket which is incompatible with the lga 2011 socket for x79 platform 16
- English 16
- Installing the cpu 16
- English 17
- Fatal1ty x99x killer series 17
- English 18
- English 19
- Fatal1ty x99x killer series 19
- Installing the cpu fan and heatsink 19
- English 20
- Installation of memory modules dimm 20
- Quad channel memory coniguration 20
- English 21
- Fatal1ty x99x killer series 21
- English 22
- Expansion slots pci express slots 22
- Pcie slot conigurations for cpu with 40 pcie lanes 22
- English 23
- Fatal1ty x99x killer series 23
- Pcie slot conigurations for cpu with 28 pcie lanes 23
- English 24
- Jumpers setup 24
- Connect the power switch reset switch and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 25
- English 25
- Fatal1ty x99x killer series 25
- Onboard headers and connectors 25
- Please connect the chassis power led to this header to 25
- Power led header 3 pin pled1 see p no 18 25
- System panel header 9 pin panel1 see p no 20 25
- English 26
- English 27
- Fatal1ty x99x killer series 27
- English 28
- And data a tpm system also 29
- Digital certiicates passwords 29
- English 29
- Ensures platform integrity 29
- Fatal1ty x99x killer series 29
- Helps enhance network security 29
- His com1 header supports a serial port module 29
- His connector supports trusted 29
- Platform module tpm system 29
- Protects digital identities and 29
- Serial port header 9 pin com1 see p no 30 29
- Tpm header 17 pin tpms1 see p no 32 29
- Which can securely store keys 29
- English 30
- Smart switches 30
- Dr debug 31
- English 31
- Fatal1ty x99x killer series 31
- English 32
- English 33
- Fatal1ty x99x killer series 33
- Installing the m _ssd ngff module 33
- M _ssd ngff module installation guide 33
- English 34
- English 35
- Fatal1ty x99x killer series 35
- M _ssd ngff module support list 35
- Connection diagram 36
- English 36
- Hdd saver cable installation guide 36
- Deutsch 37
- Einleitung 37
- Fatal1ty z97x killer series 37
- German 37
- Lieferumfang 37
- Chipsatz 38
- Deutsch 38
- Erweite rungss teckplatz 38
- Plattform 38
- Prozessor 38
- Speicher 38
- Technische daten 38
- Deutsch 39
- Fatal1ty z97x killer series 39
- Rück blende e a 39
- Anschluss 40
- Deutsch 40
- Speicher 40
- Betriebs system 41
- Bios funktion 41
- Deutsch 41
- Fatal1ty z97x killer series 41
- Hard wareüber wachung 41
- Zertiizier ungen 41
- Deutsch 42
- Jumpereinstellung 42
- Deutsch 43
- Fatal1ty z97x killer series 43
- Integrierte stiftleisten und anschlüsse 43
- Systemblende stitleiste 9 polig panel1 siehe s 1 nr 20 43
- Verbinden sie netzschalter reset taste und systemstatusanzeige am gehäuse entsprechend der nachstehenden pinbelegung mit dieser stitleiste beachten sie vor anschließen der kabel die positiven und negativen kontakte 43
- Deutsch 44
- Deutsch 45
- Fatal1ty z97x killer series 45
- Deutsch 46
- Deutsch 47
- Fatal1ty z97x killer series 47
- Deutsch 48
- Intelligente schalter 48
- Contenu de l emballage 49
- Fatal1ty x99x killer series 49
- Français 49
- French 49
- Introduction 49
- Chipset 50
- Fente d expan sion 50
- Français 50
- Mémoire 50
- Plate forme 50
- Proces seur 50
- Spéciications 50
- Connec tique du panneau arrière 51
- Fatal1ty x99x killer series 51
- Français 51
- Réseau 51
- Connec tique 52
- Français 52
- Stockage 52
- Caractéri stiques du bios 53
- Certiica tions 53
- Fatal1ty x99x killer series 53
- Français 53
- Surveil lance du matériel 53
- Système d exploi tation 53
- Coniguration des cavaliers jumpers 54
- Français 54
- Branchez le bouton de mise en marche le bouton de réinitialisation et le témoin d état du système présents sur le châssis sur cette embase en respectant la coniguration des broches illustrée ci dessous repérez les broches positive et négative avant de brancher les câbles 55
- Embase du panneau système panel1 à 9 broches voir p no 20 55
- Embase led d alimentation pled1 à 3 broches voir p no 18 55
- Embases et connecteurs de la carte mère 55
- Fatal1ty x99x killer series 55
- Français 55
- Veuillez brancher le led d alimentation du châssis sur cette embase 55
- Français 56
- Fatal1ty x99x killer series 57
- Français 57
- Français 58
- Fatal1ty x99x killer series 59
- Français 59
- Boutons intelligents 60
- Français 60
- Contenuto della confezione 61
- Fatal1ty x99x killer series 61
- Introduzione 61
- Italian 61
- Italiano 61
- Chipset 62
- Italiano 62
- Memoria 62
- Piatta forma 62
- Slot di es pansione 62
- Speciiche 62
- Fatal1ty x99x killer series 63
- I o pan nello posteriore 63
- Italiano 63
- Archiviazi one 64
- Connet tore 64
- Italiano 64
- Certiica zioni 65
- Fatal1ty x99x killer series 65
- Funzione bios 65
- Hardware monitor 65
- Italiano 65
- Impostazione jumper 66
- Italiano 66
- Collegare l interruttore dell alimentazione l interruttore di reset e l indicatore dello stato del sistema sullo chassis su questo header secondo la seguente assegnazione dei pin annotare i pin positivi e negativi prima di collegare i cavi 67
- Fatal1ty x99x killer series 67
- Header e connettori sulla scheda 67
- Header sul pannello del sistema panel1 a 9 pin vedere pag 1 n 20 67
- Italiano 67
- Italiano 68
- Fatal1ty x99x killer series 69
- Italiano 69
- Italiano 70
- Fatal1ty x99x killer series 71
- Header porta seriale com1 a 9 pin vedere pag 1 n 30 71
- Header tpm tpms1 a 17 pin vedere pag 1 n 32 71
- Italiano 71
- Questo connettore supporta il sistema trusted platform module tpm che può archiviare in modo sicuro chiavi certiicati digitali password e dati un sistema tpm permette anche di potenziare la sicurezza della rete di proteggere identità digitali e di garantire l integrità della piatta forma 71
- Questo header com1 supporta un modulo di porta seriale 71
- Interruttori intuitivi 72
- Italiano 72
- Contenido del paquete 73
- Español 73
- Fatal1ty x99x killer series 73
- Introducción 73
- Russian 73
- Spanish 73
- Conjunto de chips 74
- Español 74
- Especiicaciones 74
- Memoria 74
- Platafor ma 74
- Ranura de expansión 74
- Español 75
- Fatal1ty x99x killer series 75
- Panel trasero i o 75
- Almace namiento 76
- Conecto res 76
- Español 76
- Certiica ciones 77
- Español 77
- Fatal1ty x99x killer series 77
- Función del bios 77
- Monitor del hard ware 77
- Español 78
- Instalación de los puentes 78
- Cabezal del panel del sistema panel1 de 9 pines consulte la pág n º 20 79
- Conecte el interruptor de alimentación restablezca el interruptor y el indicador del estado del sistema del chasis a los valores de este cabezal según los valores asignados a los pines como se indica a continuación cerciórese de cuáles son los pines positivos y los negativos antes de conectar los cables 79
- Conectores y cabezales incorporados 79
- Español 79
- Fatal1ty x99x killer series 79
- Español 80
- Español 81
- Fatal1ty x99x killer series 81
- Español 82
- Cabezal de puerto serie com1 de 9 pines consulte la pág n º 30 83
- Cabezal tpm tpms1 de 17 pines consulte la pág n º 32 83
- Español 83
- Este cabezal com1 admite un módulo de puerto serie 83
- Este conector es compatible con el sistema módulo de plataforma segura tpm en inglés que puede almacenar de forma segura claves certiicados digitales contraseñas y datos un sistema tpm también ayuda a aumentar la seguridad en la red protege las identidades digitales y garantiza la integridad de la plataforma 83
- Fatal1ty x99x killer series 83
- Español 84
- Interruptores inteligentes 84
- Fatal1ty x99x killer series 85
- Russian 85
- Введение 85
- Комплект поставки 85
- Русский 85
- Память 86
- Платформа 86
- Русский 86
- Слот расширения 86
- Спецификация 86
- Чипсет 86
- Fatal1ty x99x killer series 87
- Аудио 87
- Лвс 87
- Порты ввода вывода на задней панели 87
- Русский 87
- Запоминающие устройства 88
- Разъемы 88
- Русский 88
- Fatal1ty x99x killer series 89
- Контроль оборудования 89
- Параметры bios 89
- Русский 89
- Сертификация 89
- Русский 90
- Установка перемычек 90
- Fatal1ty x99x killer series 91
- Колодка светодиодного индикатора питания 3 контактная pled1 см стр 1 18 91
- Колодка системной панели 9 контактная panel1 см стр 1 20 91
- Колодки и разъемы расположенные на материнской плате 91
- Подключите расположенные на корпусе выключатель питания кнопку перезагрузки и индикатор состояния системы к этой колодке в соответствии с распределением контактов приведенным ниже перед подключением кабелей определите положительный и отрицательный контакты 91
- Подключите светодиодный индикатор питания корпуса к этой колодке 91
- Русский 91
- Русский 92
- Fatal1ty x99x killer series 93
- Русский 93
- Русский 94
- Fatal1ty x99x killer series 95
- Колодка com1 поддерживает подключение модуля последовательного порта 95
- Колодка последовательного порта 9 контактная com1 см стр 1 30 95
- Колодка трм 17 контактная tpms1 см стр 1 32 95
- Русский 95
- Этот разъем обеспечивает поддержку системы trusted platform mod ule tpm которая способна обеспечить надежное хранение ключей цифровых сертификатов паролей и данных система трм также повышает уровень сетевой безопасности защищает цифровые идентификаторы и обеспечивает целостность платформы 95
- Русский 96
- Электронные кнопки 96
- Conteúdo da embalagem 97
- Fatal1ty x99x killer series 97
- Introdução 97
- Portuguese 97
- Português 97
- Chipset 98
- Especiicações 98
- Memória 98
- Plata forma 98
- Português 98
- Slot de expansão 98
- E s do painel pos terior 99
- Fatal1ty x99x killer series 99
- Português 99
- Áudio 99
- Armazena mento 100
- Conector 100
- Português 100
- Certii cações 101
- Fatal1ty x99x killer series 101
- Funções da bios 101
- Monitor de hardware 101
- Português 101
- Português 102
- Coniguração dos jumpers 103
- Fatal1ty x99x killer series 103
- Português 103
- Ligue o botão de alimentação o botão de reinicialização e o indicador do estado do sistema no chassi deste suporte de acordo com a descrição abaixo observe os pinos positivos e negativos antes de conectar os cabos 104
- Por favor conecte o led de alimentação do chassi neste suporte para 104
- Português 104
- Suporte do painel de siste ma panel1 de 9 pinos ver p n º 20 104
- Suporte led de alimentação pled1 de 3 pinos ver p n º 18 104
- Suportes e conectores onboard 104
- Fatal1ty x99x killer series 105
- Português 105
- Português 106
- Fatal1ty x99x killer series 107
- Português 107
- Este conector suporta um sistema com módulo de plataforma con iável tpm que pode armazenar com segurança chaves certiica dos digitais senhas e dados um sistema tpm também ajuda a melhorar a segurança de rede a proteger identidades digitais e a garantir a integridade da plata forma 108
- Este suporte com1 recebe um módulo da porta serial 108
- Português 108
- Suporte da porta serial com1 de 9 pinos ver p n º 30 108
- Suporte tpm tpms1 de 17 pinos ver p n º 32 108
- Fatal1ty x99x killer series 109
- Interruptores inteligentes 109
- Português 109
- Ambalaj i çeriği 110
- Giriş 110
- Turkish 110
- Türkçe 110
- Bellek 111
- Fatal1ty x99x killer series 111
- Genişlet me yuvası 111
- Platform 111
- Türkçe 111
- Yonga kümesi 111
- Özellikler 111
- Arka panel i o 112
- Türkçe 112
- Bağlayıcı 113
- Depolama 113
- Fatal1ty x99x killer series 113
- Türkçe 113
- Belgeler 114
- Bios özelliği 114
- Donanım monitörü 114
- Türkçe 114
- Bağlantı teli kurulumu 115
- Fatal1ty x99x killer series 115
- Türkçe 115
- Ekli bağlantılar ve bağlayıcılar 116
- Güç anahtarını bağlayın kasa üzerindeki anahtar ile sistem durumu belirtecini aşağıdaki pim düzenine göre sıfırlayın kabloları bağlarken pozitif ve negatif pimleri not edin 116
- Sistem paneli bağlantısı 9 pin panel1 bkz sf no 20 116
- Türkçe 116
- Fatal1ty x99x killer series 117
- Türkçe 117
- Türkçe 118
- Fatal1ty x99x killer series 119
- Türkçe 119
- Türkçe 120
- Akıllı anahtar 121
- Fatal1ty x99x killer series 121
- Türkçe 121
- Korean 122
- 개요 122
- 포장 내용물 122
- 한 국 어 122
- Fatal1ty x99x killer series 123
- 규격 123
- 메모리 123
- 칩세트 123
- 플랫폼 123
- 한 국 어 123
- 확장 슬롯 123
- 오디오 124
- 한 국 어 124
- 후면 패널 i o 124
- Fatal1ty x99x killer series 125
- 저장 장치 125
- 커넥터 125
- 한 국 어 125
- Bios 기능 126
- Cpu 섀시 온도 감지 cpu 섀시 전원 팬 타코미터 cpu 섀시 저소음 팬 cpu 온도에 의한 섀시 팬 속도 자동 조절 cpu 섀시 팬 다중 속도 조절 전압 모니터링 12v 5v 3 v cpu 입력 전압 cpu 내 부 전압 126
- Fcc ce whql erp eup 사용 가능 erp eup 사용 가능 전원공급장치 필 요 126
- Led 탑재 리셋 스위치 1 개 bios 선택 스위치 1 개 126
- Microsot windows 10 64 비트 8 32 비트 8 64 비트 8 32 비트 8 64 비트 7 32 비트 7 64 비트 126
- 다국어 gui 지원 128mb ami uefi legal bios 2 개 메인 bios 1 개 및 백업 bios 1 개 보안 백업 uefi 기술 지원 acpi 1 준수 웨이크 업 이벤트 smbios 2 지원 cpu dram pch 1 5v pch 1 v 전압 다중 조정 126
- 인증 126
- 하드웨어 모니터 126
- 한 국 어 126
- Fatal1ty x99x killer series 127
- 점퍼 설정 127
- 한 국 어 127
- 섀시 전원 led 를 이 헤더에 연결하십시오 128
- 섀시의 전원 스위치 리 셋 스위치 시스템 상태 표시등을 아래의 핀 할당 에 따라 이 헤더에 연결 합니다 케이블을 연결 하기 전에 양극 핀과 음 극 핀을 기록합니다 128
- 시스템 패널 헤더 9 핀 panel1 1 페이지 20 번 항목 참 조 128
- 온보드 헤더 및 커넥터 128
- 전원 led 헤더 3 핀 pled1 1 페이지 18 번 항목 참 조 128
- 한 국 어 128
- Fatal1ty x99x killer series 129
- 한 국 어 129
- 한 국 어 130
- Fatal1ty x99x killer series 131
- 한 국 어 131
- Tpm 헤더 17 핀 tpms1 1 페이지 32 번 항목 참조 132
- 시리얼 포트 헤더 9 핀 com1 1 페이지 30 번 항목 참 조 132
- 이 com1 헤더는 시리얼 포트 모듈을 지원합니다 132
- 한 국 어 132
- Fatal1ty x99x killer series 133
- 스마트 스위치 133
- 한 국 어 133
- Japanese 134
- はじめに 134
- パッケージの内容 134
- 日本語 134
- Fatal1ty x99x killer series 135
- チップセット 135
- プラットフォーム 135
- メモリ 135
- 仕様 135
- 拡張スロット 135
- 日本語 135
- オーディオ 136
- リアパネル i o 136
- 日本語 136
- Fatal1ty x99x killer series 137
- コネクター 137
- ストレージ 137
- 日本語 137
- Bios 機能 138
- ハードウェア モ ニター 138
- 日本語 138
- 認証 138
- Fatal1ty x99x killer series 139
- 日本語 139
- ジャンパー設定 140
- 日本語 140
- Fatal1ty x99x killer series 141
- オンボードのヘッダーとコネクター 141
- システムの電源ステー タスを表示するために シャーシ電源 led をこの ヘッダーに接続してくだ さい 141
- システムパネルヘッダー 9 ピン panel1 p no 20 参照 141
- 日本語 141
- 電源 led ヘッダー 3 ピン pled1 p no 18 参照 141
- 電源スイッチを接続し スイッチをリセットし 下 記のピン割り当てに従っ て シャーシのシステムス テータス表示ランプをこ のヘッダーにセットしま す ケーブルを接続する ときには ピンの と に 気をつけてください 141
- 日本語 142
- Fatal1ty x99x killer series 143
- 日本語 143
- 日本語 144
- Fatal1ty x99x killer series 145
- 日本語 145
- スマートスイッチ 146
- 日本語 146
- Fatal1ty x99x killer series 147
- Simplified chinese 147
- 包装清单 147
- 简介 147
- 简体中文 147
- 内 存 148
- 平台 148
- 扩 充槽 148
- 简体中文 148
- 芯片集 148
- 规格 148
- Fatal1ty x99x killer series 149
- 后面板 i o 149
- 简体中文 149
- 音 频 149
- Bios 功能 特点 150
- 存 储 150
- 接口 150
- 简体中文 150
- Fatal1ty x99x killer series 151
- 操作系统 151
- 硬件 监 控 151
- 简体中文 151
- 认证 151
- 简体中文 152
- 跳线设置 152
- Fatal1ty x99x killer series 153
- 按照下面的针脚分配 将机箱上的电源开关 重置开关和系统状态指 示灯连接到此接脚 在 连接线缆前请记下正负 针脚 153
- 板载接脚和接口 153
- 电源 led 接脚 3 针 pled1 153
- 简体中文 153
- 系统面板接脚 9 针 panel1 153
- 见第 1 页 第 18 个 153
- 见第 1 页 第 20 个 153
- 请将机箱电源 led 连接 到此接脚以指示系统电 源状态 153
- 简体中文 154
- Fatal1ty x99x killer series 155
- 简体中文 155
- 简体中文 156
- Fatal1ty x99x killer series 157
- 简体中文 157
- 智能开关 158
- 简体中文 158
- Fatal1ty x99x killer series 159
- X o o o o o 159
- 依據中國發布的 電子信息產品污染控制管理辦法 及 sj t 11364 2006 電 子信息產品污染控制標示要求 電子信息產品應進行標示 藉以向消費者揭 露產品中含有的有毒有害物質或元素不致發生外洩或突變從而對環境造成污染 或對人身 財產造成嚴重損害的期限 依上述規定 您可于本產品之印刷電路 板上看見圖一之標示 圖一中之數字為產品之環保使用期限 由此可知此主板 之環保使用期限為 10 年 159
- 圖一 159
- 有毒有害物質或元素的名稱及含量說明 159
- 简体中文 159
- 若您慾了解此產品的有毒有害物質或元素的名稱及含量說明 請參照以下表格 及說明 159
- 電子信息產品污染控制標示 159
- Traditional chinese 160
- 包裝內容 160
- 簡介 160
- 繁體中文 160
- Fatal1ty x99x killer series 161
- 平台 161
- 擴充插槽 161
- 晶片組 161
- 繁體中文 161
- 規格 161
- 記憶體 161
- 後面板 i o 162
- 繁體中文 162
- 音訊 162
- Bios 功能 163
- Fatal1ty x99x killer series 163
- 儲存裝置 163
- 接頭 163
- 繁體中文 163
- 作業系統 164
- 硬體 監視器 164
- 繁體中文 164
- 認證 164
- Fatal1ty x99x killer series 165
- 繁體中文 165
- 跳線設定 165
- 板載排針及接頭 166
- 系統面板排針 9 pin panel1 請參閱第 1 頁 編號 20 166
- 繁體中文 166
- 請依照以下的針腳排 列將機殼上的電源開 關 重設開關及系統 狀態指示燈連接至此 排針 在連接纜線之 前請注意正負針腳 166
- 請將機殼電源 led 連接至此排針 以 指示系統的電源狀 態 166
- 電源 led 排針 3 pin pled1 請參閱第 1 頁 編號 18 166
- Fatal1ty x99x killer series 167
- 繁體中文 167
- 繁體中文 168
- Fatal1ty x99x killer series 169
- 繁體中文 169
- 繁體中文 170
- Fatal1ty x99x killer series 171
- 智慧型開關 171
- 繁體中文 171
- Chipset 172
- Indonesian 172
- Memori 172
- Platform 172
- Slot ek spansi 172
- Spesiikasi 172
- Fatal1ty x99x killer series 173
- Panel i o belakang 173
- Konektor 174
- Penyim panan 174
- Fatal1ty x99x killer series 175
- Fitur bios 175
- Monitor perangkat keras 175
- Sertiikasi 175
- Bahasa indonesia 176
- Asrock america inc 191
- Asrock europe b v 191
- Asrock incorporation 191
- Contact information 191
- Ec declaration of conformity 192
Похожие устройства
- ASRock Fatal1ty X99 Professional/3.1 Инструкция
- ASRock Fatal1ty X99 Professional/3.1 Краткая инструкция
- ASRock X99 OC Formula Инструкция
- ASRock X99 OC Formula Краткая инструкция
- ASRock Fatal1ty X99M Killer Инструкция
- ASRock Fatal1ty X99M Killer Краткая инструкция
- ASRock Fatal1ty X99X Killer/3.1 Инструкция
- ASRock Fatal1ty X99X Killer/3.1 Краткая инструкция
- Daikin FWT02GATNMV1 Руководство по эксплуатации
- Daikin FWT02GATNMV1 Технические данные
- Daikin FWT02GATNMV1 Инструкция по монтажу
- Daikin FWT03GATNMV1 Технические данные
- Daikin FWT03GATNMV1 Руководство по эксплуатации
- Daikin FWT03GATNMV1 Инструкция по монтажу
- Daikin FWT04GATNMV1 Технические данные
- Daikin FWT04GATNMV1 Руководство по эксплуатации
- Daikin FWT04GATNMV1 Инструкция по монтажу
- Daikin FWT05GATNMV1 Технические данные
- Daikin FWT05GATNMV1 Руководство по эксплуатации
- Daikin FWT05GATNMV1 Инструкция по монтажу