Canton DM 90.3 [29/35] Ir delete function
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Canton DM 90.3 [29/35] Ir delete function

Canton DM 90.3 [29/35] Ir delete function
56
57
IR learning function
The DM System can learn the infrared code of your TV remote control and therefore allows you to control the functions of the Soundbar
and TV device via one remote control. You can allocate the instructions for the Soundbar to any key of the TV remote control. When
choosing a key make sure that the instructions for the Soundbar do not conflict with the TV device. We recommend that you deactivate
the internal loudspeaker of the TV device once the Soundbar is connected.
1
Hold the TV remote control in position.
2
Switch the Soundbar on.
3
Press and hold the “ON/Standby” key of the Soundbar
remote control for approx. 5 seconds.
4
The display shows a flashing
IRL
.
5
Press the wanted function on the Canton
remote control e. g. “Volume +”.
6
Now the display shows the chosen function, e. g.
v
.
7
Within 20 seconds press the key you wish to allocate
to this function on the TV remote control.
8
Once this has been successfully allocated the display
will show
OK
and you can continue with the
programming of the next key function, e. g. “Volume –“.
9
If the display shows
FAI
this means the allocation
has failed and you should repeat steps 5 to 8.
Exit menu
Press and hold the “ON/Standby” key again for
longer than 5 seconds to exit the “IR learning
function” menu.
If the Soundbar does not receive any input instruc-
tions from the remote control within a period of
60 seconds the menu navigation returns to normal
mode automatically.
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
STEREO
SURROUND
BASS
TREBLE
BLUETOOTH
PAIRING
ON
STANDBY
MUTE
TV remote control
EnglishEnglish
IR delete function
To delete the TV remote control commands learned by the DM System you need to follow these steps:
1
Switch the Soundbar on.
2
Press the “ON/Standby” key on the Soundbar remote
control for approx. 5 seconds.
3
The display will flash
IRL
.
4
Press the “Mute” key of the Soundbar remote control
for approx. 5 seconds.
5
The display will show
CLR
for approx. 5 seconds. The Soundbar
will then switch automatically back to normal operation.
Note: The red “ON/Standby” key on the DM remote control has a dual function. Press it once and the display will show
ON
, which allows the switching on function to be programmed. If the red “ON/Standby” key on the DM remote
control is pressed twice in quick succession the display will show
STB
and the Standby resp. switching off function can
be programmed. If your TV remote control has only one key for the “ON” and “OFF” functions both the “ON” and
“Standby” functions must still be allocated with this command.
Note: Due to the variety of infrared codes it is not possible to guarantee that every IR remote control signal can be learned
by the DM system.

Содержание

Похожие устройства

Скачать