Canton DM 90.3 [28/35] Configurating the inputs inp

54

55

Configurating the inputs (INP)

When the device is supplied all the physically existing inputs are provided with a source designation. These are as follows: ARC = TV; HD1 =

BDP; HD2 = SAT; HD3 = PS; COX = DVD; OPT = CD; AUX = VCR; BT = Bluetooth

®

. You can configure the names allocated to the various

inputs to suit your source device.

To configure the designation proceed with the following steps:

Now press one of the two “Input” keys briefly to select the desired physical

input (ARC, HD1, HD2, etc.).

3

Now press one of the “Volume” keys briefly to select the desired designation.

You can choose from the following predefined designations: “---” (Input

deactivated), TV, BDB, SAT, CD, DVD, CAM, REC, PAD, POD, TAB, TUN,

DAB, PS, VCR.

4

To allocate a designation to an additional input, repeat steps 2 and 3.

5

Comment: The designation for the BT input cannot be changed. If you would have deactivated all inputs, BT (Bluetooth

will remain as fixed input.

With the device switched on, press and hold the “Play Mode” key for more than 3 seconds, until

AUT

appears on the display.

Press the “Play Mode” key again briefly, until

appears on the display.

If you wish to cancel the process, press the “Volume –“ key within 10 seconds after pressing the “Volume +” key. The display will show

NO

. 10 seconds after pressing the “Volume –“ key the DM system will return to its previous operating mode

To exit the menu without taking any action press and hold the “Play Mode” key again for more than 3 seconds. If no input is received