Zelmer 28Z025 [65/72] How to fill the water

Zelmer Navigator Supreme ZIR1175H (28Z025) [65/72] How to fill the water
65GW28-022_v01
How to ll the water
Disconnect the iron from mains
supply outlet.
Move the steam Control Knob
(4) to position.
Release the water inlet cover (8)
and ll water through the water
inlet hole.
Fill up to the MAXlevel marked
on the side of water tank.
Close the water inlet cover (8).
Temperature setting
Connect the iron to a suitable mains supply outlet.
The display (5) glows for a moment and you can hear single sound sig-
nal. Then the display (5) go off.
Press the button on the left side of the display, to switch
it on you can hear a single sound signal. Number, type of garment and
amount of dots referring to the temperature level.
To set the temperature use and buttons, located
at both sides of the display.
In order to increase the temperature press button many
times (a sound signal goes with every click). The following labels shall
appear on display (5): acrylic, nylon, silk, polyester, blend, wool, cotton,
jeans, linen.
In order to reduce the temperature press button many times
(a sound signal goes with every click). The labels shall appear on dis-
play in reverse sequence.
Dots indicate the temperature setting.
Preparation for operation – rst ironing
Remove any protective lms or sticker from the soleplate (1) and the
cabinet.
Unwind and straighten the power cord (12).
Fill the water tank in as described under “ How To Fill Water”.
The display (5) glows for a moment and you can hear single sound sig-
nal. Then the display (5) go off.
Press button to set the temperature on display
.
When the temperature is reached the number stops blinking and you
can hear a single sound signal.
Move the Steam Control Knob (4) to position.
Steam starts coming out from the holes in the sole plate after putting the
iron in horizontal position and after Burst of steam knob (3).
Begin rst time ironing with an old towel.
The steam is not generated after the water tank is emptied.
The preparation work is completed. The iron is now ready for proper
use.
After operation press and hold button for about 2 sec-
onds to switch off the iron. You can hear single sound signal. Then the
display (5) goes off.
Move the Steam Control Knob (4) to position.
Disconnect the iron from mains supply outlet.
When the iron gets cool completely, store it vertically in a safe place.

Содержание

Похожие устройства

Скачать