Home
Главная
Zelmer
Утюг
28Z025
Инструкция по эксплуатации Страница: 67

Zelmer 28Z025 [67/72] Self cleaning

67GW28-022_v01

For stubborn wrinkles, wait a few seconds before pressing the – Burst of

Steam Button (3) again. Most wrinkles can be removed within three

presses.

After operation press and hold – button for about 2 sec-

onds to switch off the iron. You can hear single sound signal. Then the

display (5) goes off.

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

It may be necessary to press the burst of steam button a few times to

start this function.

For optimum steam quality, do not operate the Burst of Steam more

than three times in one cycle.

Hold the iron some centimetres away from delicate garments (arti-

cial, silk, velvet etc.), otherwise they can be damaged.

Build-in anti-scale system

The build-in anti-scale cartridge is designed to reduce the build-up of lime

scale that occurs during steam ironing. This will prolong the working life of

your iron, although it does not stop the natural process of build-up of lime

scale completely.

Self-cleaning

This function removes the scales and minerals built up in the Steam Cham-

ber. The iron will remain in the best condition if this function is performed

at least once a month or more regularly depending on the hardness of the

water used. You can see on LCD display (5).

Fill the water tank in as described under “ – How To Fill Water”.

Place the iron on the surface in vertical, resting position. –

Connect the iron to a suitable mains supply outlet. –

The – display (5) glows for a moment and you can hear single sound sig-

nal. Then the display (5) go off.

Set the temperature – (9 - highest level) with

or buttons, as described in “Temperature Setting” item.

For stubborn wrinkles, wait a few seconds before pressing the – Burst of

Steam Button (10) again. Most wrinkles can be removed within three

presses.

After operation press and hold – button for about 2 sec-

onds to switch off the iron. You can hear single sound signal. Then the

display (5) goes off.

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

It may be necessary to press the burst of steam button a few times to

start this function.

For optimum steam quality, do not operate the Burst of Steam more

than three times after the control light goes off.

Burst of steam in vertical position – Always follow the garment

manufacturer’s ironing instructions mentioned at the garment label.

This function provides extra amount of steam to remove wrinkles on delicate

garments in hanging position, hanging curtains, or other hanging fabrics.

Warning:

Do not apply steam on any clothes or fabrics that are being worn by

human or pets. Never direct the steam to human or pets.

Fill the water tank in as described under “ – How To Fill Water”.

Connect the iron to a suitable mains supply outlet. –

The – display (5) glows for a moment and you can hear single sound sig-

nal. Then the display (5) go off.

Set the temperature – (5 level)

or higher with or but-

tons, as described in “Temperature Setting”

item.

The – steam ironing indicator (B) ap-

pears on display.

The appliance is ready for operation. –

Hold the iron between 15 and 30 centimetres away from the garment. –

Press the – Burst of Steam Button (3) once – steam will shoot from

the holes of the soleplate. The steam penetrates the fabric removing

wrinkles.

Zelmer 28Z025 [67/72] Self cleaning

Содержание

Похожие устройства