Home
Главная
Zelmer
Утюг
28Z013
Инструкция по эксплуатации Страница: 60

Zelmer 28Z013 [60/64] Dry ironin

60 GW28-009_v01

How to use the iron lock

Iron Lock button have the three positions, Move Iron Lock Button from Up

to Bottom (or) Bottom to Up.

Up position – remove the iron without the cord:

Put the iron to the stand.

Move the button on up position .

You can remove the iron without the cord.

Middle position – locking:

Put the iron to the stand.

Move the button on middle position .

The iron is locked with the stand.

Bottom position – remove the iron with the cord:

Put the iron to the stand.

Move the button on bottom position .

You can remove the iron with the cord.

How to ll the water

Disconnect the iron from mains supply outlet. –

Remove the iron from the Stand as –

described “How to Use Iron Lock”

Release the – Water Inlet Cover (2).

Fill water through the water inlet hole. –

Fill up to the ‘ – MAX’ level marked on the

side of water tank.

Close the – Water Inlet Cover (2).

Note:

For best result, it is advisable to use demineralised water or distilled

water. Do not use chemically descaled water or any other liquids.

Preparation for operation – rst ironing

Remove any protective lms or sticker from the – soleplate (12) and the

cabinet, if any.

Unwind and straighten the – power cord (11).

Fill the iron as described in “How to ll water”. –

Lock the iron with stand as described in “How to Use Iron Lock”. –

Connect the iron to a suitable mains supply outlet. –

Turn the – Temperature Dial (9) in clockwise direction to ●●● position

– control light (6) glows.

Control light goes off when the required temperature is reached. –

Move the – Steam Control Knob (3) to position.

Steam starts coming out from the holes in the sole plate after putting –

the iron in horizontal position and after Burst of steam knob (4)

Remove the iron from the stand as described in “How to Use Iron –

Lock”.

Begin rst time ironing with an old towel. –

When the water tank is empty and there is no more steam produced; the –

preparation work is completed. The iron is now ready for proper use.

After operation

Move the – Temperature Dial (9) in anti-clockwise direction to „MIN”;

the iron is switched off.

Move the – Steam Control Knob (3) to position.

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

Spraying

This function can be used any time and is not affect any setting. –

Fill the water tank as described in How to Fill Water. –

Aim the – nozzle (1) to the garment.

Press the – Spray Button (5).

It may be necessary to press the spray button a few times to start this –

function.

Dry ironing – Always follow the garment manufacturer’s ironing

instructions mentioned at the garment label.

Unwind and straighten the – power cord (11).

Fill the iron as described in “How to ll water”. –

Lock the iron with stand as described in “How to Use Iron Lock”. –

Move the – Steam Control Knob (3) to position.

Connect the iron to a suitable mains supply outlet. –

Turn the – Temperature Dial (9) in clockwise direction to; set ●, ●● or

●●● position.

Zelmer 28Z013 [60/64] Dry ironin

Содержание

Похожие устройства