Home
Главная
Teka
Варочная Поверхность
VT TC 2P.1
Инструкция по эксплуатации Страница: 11

Teka VT TC 2P.1 [11/16] Cleaning and care

Cleaning and Care

• Before cleaning, switch off the hob and let it cool down.

• Never clean the glass ceramic hob with a steam cleaner or

similar appliance!

• When cleaning make sure that you only wipe lightly over the

ON/OFF button

. The hob may otherwise be accidentally

switched on!

General information on the ceramic glass

hob

Important!

Never use aggressive cleaning agents such as rough

scouring agents, abrasive saucepan cleaners, rust and stain

removers etc.

Cleaning after use

Always clean the entire hob when it has become soiled. It is

recommended that you do so every time the hob is used. Use a

damp cloth and a little washing up liquid for cleaning. Then dry

the hob with a clean dry cloth to ensure that there is no detergent

left on the surface of the hob.

Weekly clean

Clean the entire hob thoroughly once a week with commercial

glass ceramic cleaning agents.

Please follow the manufacturer's instructions carefully.

When applied, the cleaning agent will coat the hob in a protective

film which is resistant to water and dirt. All dirt remains on the film

and can be removed easily. Then rub the hob dry with a clean

cloth. Make sure that no cleaning agent remains on the surface

of the hob since this will react aggressively when the hob is

heated up and will change the surface.

Specific soiling

Heavy soiling

and stains (limescaling and shiny, mother-of-

pearl-type stains) can best be removed when the hob is still

slightly warm. Use commercial cleaning agents to clean the hob.

Proceed as outlined under Item 2.

First soak food which has boiled over

with a wet cloth and

then remove remaining soiling with a special glass scraper for

glass ceramic hobs. Then clean the hob again as described

under Item 2.

Burnt sugar

and melted plastic must be removed immediately,

when they are still hot, with a glass scraper. Then clean the hob

again as described under Item 2.

Grains of sand

which may get onto the hob when you peel

potatoes or clean lettuce may scratch the surface of the hob

when you move pots around. Make sure that no grains of sand

are left on the hob.

Changes in the colour

of the hob will not affect the function and

the stability of the glass ceramic material. These colour changes

are not changes in the material but food residues which were not

removed and which have burnt into the surface.

Shiny spots

result when the base of the cookware rubs on the

surface of the hob, particularly when cookware with an aluminium

base or unsuitable cleaning agents are used. They are difficult to

remove with standard cleaning agents. You may need to repeat

the cleaning process several times. In time, the decoration will

wear off and dark stains will appear as a result of using

aggressive cleaning agents and faulty pan bottoms.

Griddle

Firstly use a scraper to remove all food and grease spats off the

hot zone of the griddle. It is easiest if, immediately subsequent to

using the griddle, any dirt is pushed from the zone which is still

hot onto the cold zone, since this dirt can then be easily removed

after the appliance has cooled down.

The cold griddle is then freed of grease with the help of dish-

water, wiped with a damp cloth and then dried with a clean cloth

or a sheet of kitchen roll.

We recommend you to rub down the griddle with half a lemon or

lemon juice. Any slight dirt marks from protein, e.g. from meat, is

removed and the griddle shines again.

Stubborn stains

Should there still be stubborn stains on the surface subsequent

to this cleaning procedure, they may be removed with a cleaning

agent suitable for hobs.

A little of the cleaning agent is rubbed onto the entire surface of

the griddle with a sheet of kitchen roll until no more stains are

visible. The entire griddle surface is then immediately wiped

several times with a damp cloth after which it is rubbed dry.

Never use cleansers which contain silicon. These will leave

a film on the grill surface which could be absorbed by the

food upon next use. Therefore, follow the instructions of the

manufacturer in this regard.

Using a cleaning scraper

• Caution! Risk of cutting! The blade of the cleaning scraper is

very sharp!

• Always hold the cleaning scraper flat to the surface and push

the grease away from you.

• Do not scratch the surface with the edge of the scraper.

Teka VT TC 2P.1 [11/16] Cleaning and care

Содержание

Похожие устройства