Zkteco LPRC100 [2/8] Installing the device

It is important for the machine to quickly and accurately output license plate recognition results and capture

high-quality license plate pictures. Adjust the angle and distance of the camera to ensure that complete and

clear license plate pictures are captured.

 Installation location

It is recommended to install the camera on the safety island near the lane in front of the barrier gate host.

Make sure that the camera is installed on the safety island and close to the barrier gate host. It should not

affect the operation of barrier gate.

 Installation height

The camera should be installed at a height of 0.9m ~ 1.2m to ensure a valid recognition distance of more than

2m. The optimal recognition distance is 3.5m ~ 5m.

 Installation angle

The recommended angle between the camera shooting direction and the road is in the range of 0-15 degree.

The recommended angle between the LED lighting direction and the road is in the range of 0-15 degree.

Note: 0-15 degree is only the recommended value, the specific debugging angle is based as per the test

environment.

Installing an external fill light can provide better image quality and improve the recognition rate at night. External

fill light uses special white LED lights on parking lots, providing automatic switching through a photo resistor,

with a waterproof rating of IP65.

0.9m~1.2m

3.5m

Optimal recognition distance

1. Installing the device

Distance should be greater than 30cm

40cm ~ 50cm above the ground

2. Installing an external fill light