Planet ICA-110W [10/20] Assign automatically using

Manually Assign / Static IP Address

Directly enter the IP address according to local network environment.

The default settings are as follows:

• Default IP – 192.168.0.20

• Subnet Mask – 255.255.255.0

• Default Gateway – 0.0.0.0

Assign Automatically Using

If your network is using DHCP server you can click on “DHCP”. Under this setting

Internet Camera will automatically assign an IP address from DHCP server. Each

time Internet Camera starts up make sure the DHCP server is setup well to be able

to assign a static IP to your Internet Camera. If your application requires direct

connection from an ADSL modem then you need to have an ISP

PPPoE account.

Click on “PPPoE” option and enter the User ID and Password into the respective ﬁelds.

Internet Camera will get an IP address from the ISP each time Internet Camera

boots.

DNS IP Address:

DNS (Domain Name System) server is an Internet service that translates domain names

into IP addresses. Enter at least one DNS IP address.

Dynamic DNS:

Before using this feature, you have to register an account, password, and DDNS domain

name from a DDNS service provider. Then select one DDNS provider from the pull-down

menu and ﬁll in information in corresponding ﬁelds.

Wireless Interface: (ICA-110W only)

Connection Mode:

Use the Connection Mode to determine the type of wireless communication for ICA-

110W. There are two choices of

Infrastructure mode, and Adhoc mode.

ESSID (Extended Service Set ID):

This ﬁeld is used to setup which wireless network to be connected for ICA-110W

communication. The ESSID is a unique identiﬁer shared among all clients in a wireless

network environment. The default Network Name is blank space (NULL String), this

default setting will let ICA-110W connect to ANY access point under the infrastructure

network mode. To connect ICA-110W to a speciﬁc access point on the network make

sure to set the ESSID of ICA-110W to correspond with the access point’s ESSID

for communication. Type any string up to 32 characters long (spaces, symbols, and

punctuation are not allowed) in the Network Name box.

To connect ICA-110W to an Ad-hoc wireless workgroup, make sure to set the same

wireless channel and ESSID to match with the PC/Notebook’s setting for direct

wireless communication under the Ad-hoc wireless workgroup.