Daikin FTXJ35MV1BW [35/40] Troubleshooting

Daikin FTXJ20MV1BW [35/40] Troubleshooting
34
Troubleshooting
Troubleshooting measures are classi ed into the following
2 types on a remedial basis.
Take an appropriate measure according to the symptom.
Not trouble
• These cases are not troubles.
Check
• Please check again before calling a
repair person.
The air conditioner does not operate.
(Multi-monitor lamp is off.)
Has a circuit breaker turned off or a fuse blown?
Is it a power failure?
Are batteries set in the remote controller?
Is the timer setting correct?
Cooling (Heating) effect is poor.
Are the air lters clean?
Is there anything blocking the air inlet or the outlet of
the indoor and the outdoor units?
Is the temperature setting appropriate?
Are the windows and doors closed?
Are the air ow rate and the air ow direction set
appropriately?
Is the air conditioner in ECONO operation or
OUTDOOR UNIT QUIET operation?
An abnormal functioning happens
during operation.
The air conditioner may malfunction with lightning or
radio waves. Turn off the circuit breaker, turn it on
again and try operating the air conditioner with the
remote controller.
Operation stopped suddenly.
(Multi-monitor lamp ashes.)
Are the air lters clean?
Clean the air lters.
Is there anything blocking the air inlet or the outlet of
the indoor and the outdoor units?
Turn off the circuit breaker and take all obstacles away.
Then turn it on again and try operating the air conditioner
with the remote controller. If the lamp still ashes, call the
service shop where you bought the air conditioner.
Upper and lower front panels do not
open. (Multi-monitor lamp ashes.)
Is there something caught in the upper and lower front
panels?
Remove the object and attempt operation again using
the remote controller.
If the upper and lower front panels still do not open and
the multi-monitor lamp is still ashing,
consult the service shop where you bought
the air conditioner.
Upper front panel does not close
completely.
Are the upper front panel locks set appropriately?
Mist comes out of the indoor unit.
This happens when the air in the room is cooled into
mist by the cold air ow during COOL operation.
This is because the air in the room is cooled by the
heat exchanger and becomes mist during
defrost operation.

Содержание

Скачать