Icom IC-FR3000 [17/24] Operation

Icom IC-FR3000 [17/24] Operation
4
12
OPERATION
Turning power ON
q Push [POWER] to turn power ON.
w If the repeater is programmed for a power on pass-
word by an Icom Dealer, input digit codes directly.
The keys in the table below can be used for password
input.
The repeater detects numbers in the same block as
identical. Therefore “01234” and “56789” are the same.
e When the “PASSWORD” indication does not clear
after inputting 4 digits, the input code number may
be incorrect. Turn power off and start over in this
case.
Receiving and transmitting
D Receiving
q Push [POWER] to turn power ON.
w Set the audio and squelch levels.
Rotate [SQUELCH] fully counterclockwise in ad-
vance.
Rotate [VOLUME] to adjust the audio output level.
Rotate [SQUELCH] clockwise until the noise dis-
appears.
e Push [UP] or [DN] to select the desired channel.
When receiving a signal, BUSY indicator turns ON and
audio is emitted from the speaker.
Further adjustment of [VOLUME] to a comfortable listen-
ing level may be necessary at this point.
D Transmitting
q Take the microphone off hook.
w Wait for the channel to become clear.
e Push and hold [PTT] to transmit, then speak into the
microphone at your normal voice level.
r Release [PTT] to receive.
IMPORTANT:
To maximize the readability of the transmitted signal:
(1) Pause briefly after pushing [PTT].
(2) Hold the microphone 1 to 2 inch (2.5 to 5 cm) from
your mouth, then speak into the microphone at a
normal voice level.
KEY
[DN] [UP] [MONI]
[RPT/BASE]
[REMOTE]
NUMBER
012 3 4
567 8 9

Содержание

Скачать