![Icom IC-F310 [2/20] Cautions important](/img/pdf.png)
Icom IC-F310 [2/20] Cautions important
![Icom IC-F310 [2/20] Cautions important](/views2/1074525/page2/bg2.png)
i
RWARNING! NEVER connect the transceiver to an
AC outlet. This may pose a fire hazard or result in an electric
shock.
NEVER connect the transceiver to a power source of more
than 16 V DC such as a 24 V battery. This connection will ruin
the transceiver.
NEVER cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.
NEVER place the transceiver where normal operation of
the vehicle may be hindered or where it could cause bodily
injury.
NEVER allow children to touch the transceiver.
NEVER expose the transceiver to rain, snow or any liquids.
USE supplied microphone only. Other microphones have
different pin assignments and may damage the transceiver.
CAUTIONSIMPORTANT
READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL— This
instruction manual contains important operating instructions
for the IC-F300S/F400S series
VHF/UHF TRANSCEIVERS.
EXPLICIT DEFINITIONS
The following explicit definitions apply to this manual.
WORD DEFINITION
RWARNING
Personal injury, fire hazard or electric shock
may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
Versions of the IC-F310S/F320S/F410S/F420S which display
“CE” on the serial number seal, comply with the essential re-
quirements of the 89/336/EEC directive for Electromagnetic
Compatibility.
SmarTrunk II™ is a trademark of SmarTrunk Systems, Inc.
Содержание
- If320s if310s 1
- If410s if420s 1
- Instruction manual 1
- Uhf transceiver 1
- Vhf transceiver 1
- Cautions important 2
- Explicit definitions 2
- R warning neve 2
- Read all instruction 2
- Save this instruction manual 2
- Be careful 3
- Connection and maintenance 9 12 3
- Important i explicit definitions i cautions i table of contents ii 1 panel description 1 5 3
- Operating the transceiver without running the vehi cle s engine the vehicle s battery will quickly run out if the transceiver is in transmission while the vehicle s engine is off 3
- Operation 6 8 3
- Optional smartrunk ii operation 13 15 3
- Options 16 3
- Placing the transceiver against walls this will ob struct heat dissipation 3
- Placing the transceiver in excessively dusty envi ronments 3
- Table of contents 3
- The transceiver will become hot when operating continuously for long periods 3
- The use of chemical agents such as benzine or al cohol when cleaning as they damage the transceiver sur faces 3
- Use or place the transceiver in areas with tem peratures below 30 c or above 60 c or in areas subject to direct sunlight such as the dashboard 3
- I front panel 4
- Panel description 4
- I function led 5
- Panel description 5
- I programmable function keys 6
- Panel description 6
- Panel description 7
- Panel description 8
- Product information 8
- 5 1 6 2 7 3 8 4 9 9
- I channel selection 9
- I turning power on 9
- Operation 9
- D transmitting notes 10
- I receiving and transmitting 10
- Important 10
- Operation 10
- D dtmf transmission 11
- D entering the user set mode 11
- D scrambler function 11
- I user set mode 11
- Operation 11
- Connection and maintenance 12
- I rear panel and connection 12
- Connection and maintenance 13
- I supplied accessories 13
- Connection and maintenance 14
- I mounting the transceiver 14
- I optional ut 96 ut 105 ut 109 and ut 110 installation 14
- A key element in the performance of any communication sys tem is an antenna ask your dealer about antennas and the best places to mount them 15
- Avoid the use of solvents such as benzene or al cohol as they may damage transceiver surfaces 15
- Connection and maintenance 15
- I antenna 15
- I cleaning 15
- I fuse replacement 15
- I optional opc 617 installation 15
- If the transceiver becomes dusty or dirty wipe it clean with a dry soft cloth 15
- Install the opc 617 as shown below 15
- Two fuses are installed in the supplied dc power cable if a fuse blows or the transceiver stops functioning track down the source of the problem if possible and replace the dam aged fuse with a new rated one 15
- D calling another local system subscriber 16
- D placing a telephone call 16
- D receiving a call 16
- I smartrunk ii and conventional modes 16
- I smartrunk ii operation 16
- Optional smartrunk ii operation 16
- D emergency call 17
- D last number redial 17
- D memory speed dialing 17
- D programming memory speed dial 17
- D ptt dispatch operation 17
- D system busy indication 17
- D terminating a call 17
- D turbo speedial 17
- Optional smartrunk ii operation 17
- D clear channel alerting 18
- Optional smartrunk ii operation 18
- Options 19
- 9 16 kamihigashi hirano ku osaka 547 0002 japan 20
Похожие устройства
- Ardo KA 540 G6 Инструкция по эксплуатации
- Fujifilm F XF60MMF2.4R Macro Инструкция по эксплуатации
- Icom IC-F320 Инструкция по эксплуатации
- Ardo KC 640 G6 Инструкция по эксплуатации
- Sony SAL 1650 Инструкция по эксплуатации
- Icom IC-F410 Инструкция по эксплуатации
- Ardo TLE 66V4 EF Инструкция по эксплуатации
- Tokina AT-X 11-16 F/2.8 Инструкция по эксплуатации
- Icom IC-F420 Инструкция по эксплуатации
- Ardo C 6604 EB Инструкция по эксплуатации
- Tokina AT-X 16-28 F/2.8 ProFX Инструкция по эксплуатации
- Toshiba 22L1353 Инструкция по эксплуатации
- Ardo A 5604 EB Инструкция по эксплуатации
- Tokina AT-X M100 F/2.8 Macro Инструкция по эксплуатации
- Toshiba 32L6353 Инструкция по эксплуатации
- Ardo A 5504 EB Инструкция по эксплуатации
- Bosch WLX24364OE Инструкция по эксплуатации
- Toshiba 50L2353 Инструкция по эксплуатации
- Ardo KTLE 66V4 EF Инструкция по эксплуатации
- Toshiba 22L1354 Инструкция по эксплуатации