![Icom IC-M2A [29/32] Troubleshooting](/img/pdf.png)
Icom IC-M2A [29/32] Troubleshooting
![Icom IC-M2A [29/32] Troubleshooting](/views2/1074617/page29/bg1d.png)
23
9
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION. REF.
No sound comes from
the speaker.
• Squelch level is too deep.
• Volume level is too low.
• Speaker has been exposed to water.
p. 7
p. 8
—
• Set squelch to the threshold point.
• Set [OFF/VOL] to a suitable level.
• Drain water from the speaker.
No power comes ON.
• The battery is exhausted.
• Bad connection to the battery pack.
p. 17
p. 3
• Recharge the battery pack.
• Check the connection to the transceiver.
Transmitting is impossi-
ble, or high power can
not be selected.
• Some channels are for low power or re-
ceive only.
• The battery is exhausted.
• The output power is set to low.
pgs. 2, 4
p. 17
p. 2
• Change channels.
• Recharge the battery pack.
• Push [H/L] to select high power.
The display channel
cannot be changed.
• Lock function is activated. • Push [H/L•
LOCK] for 1 sec. to cancel the
function.
p. 2
Scan does not start.
• “TAG” channels are not programmed. • Set the desired channels as “TAG” channels. p. 12
No beeps sound.
• Beep tones are turned OFF.
• Set the beep tones to AUTO or 1–10 in SET
mode.
p. 13
Self check error.
(Temperature error)
• Transceiver’s inside temperature is below
–20°C (–4°F) or above +60°C (+120°F).
• Leave the transceiver at room temperature
for a while. Turn the power ON to check if the
internal temperature has returned to normal.
Self check error.
(Battery voltage error)
• The connected battery pack’s voltage is
more than 11 V.
• Verify the battery voltage is correct.
—
—
Self check error.
(Water intrusion error)
• Water has entered the transceiver.
• Have the transceiver checked at your local
distributor or dealer to see whether the trans-
ceiver works properly or not.
—
Содержание
- Instruction manual 1
- Vhf marine transceiver 1
- Caution 2
- Electromagnetic interference compatibility 2
- Safety training information 2
- Distress call procedure 3
- H using channel 16 3
- In case of emergency 3
- Recommendation 3
- Dual watch and tri watch functions 4
- Explicit definitions 4
- Features 4
- Foreword 4
- Important 4
- Large easy to read lcd 4
- Read all instructions 4
- Save this instruction manual 4
- Simple operation 4
- Waterproof construction 4
- Be careful 5
- Caution 5
- Cautions 5
- Make sure 5
- R warning never 5
- Table of contents 6
- D priorities 7
- D privacy 7
- D radio licenses 7
- Operating rules 7
- I front top and side panels 8
- Panel description 8
- Panel description 9
- I function display 10
- Panel description 10
- Q w e r 10
- Panel description 11
- Basic operation 12
- Channel 9 call channel 12
- D channel 16 12
- D u s a international and canadian channels 12
- I channel selection 12
- Basic operation 13
- D weather channels 13
- I adjusting the squelch level 13
- I lock function 13
- Basic operation 14
- Caution 14
- I receiving and transmitting 14
- Transmitting without an antenna may damage the transceiver 14
- Basic operation 15
- I automatic backlighting 15
- I call channel programming 15
- Dualwatch monitors channel 16 while you are receiving an other channel tri watch monitors channel 16 and the call channel while receiving another channel 16
- Dualwatch tri watch 16
- Dualwatch tri watch simulation 16
- E to cancel dualwatch tri watch push dw 16
- Example operating tri watch on int channel 07 16
- For 1 sec to start tri watch 16
- I description 16
- I operation 16
- Momentarily to start dualwatch push dw 16
- Q select the desired operating channel w push dw 16
- I scan types 17
- Scan operation 17
- I setting tag channels 18
- I starting a scan 18
- Scan operation 18
- D beep ton 19
- D weather alert functio 19
- I set mode items 19
- I set mode programming 19
- Set mode 19
- D auto scan functio 20
- D monitor action selectio 20
- D priority scan functio 20
- D scan resume time 20
- Set mode 20
- D auto power save functio 21
- D automatic backlightin 21
- D lcd contrast selectio 21
- D self check functio 21
- Set mode 21
- D battery voltage indicato 22
- D s meter rf meter indicato 22
- Set mode 22
- Set mode list 22
- Battery charging 23
- D recycling information u s a only 23
- I battery cautions 23
- I battery charging 23
- Battery charging 24
- I installing batteries in the battery case 24
- Ï charging connections 24
- Battery charging 25
- D rapid charging with the bc 119n ad 103 25
- D rapid charging with the bc 121n ad 103 25
- I optional battery chargers 25
- Flexible antenna 26
- Handstrap 26
- Supplied accessories 26
- Supplied accessories and attachments 26
- D swivel belt clip 27
- Supplied accessories and attachments 27
- R caution 28
- Supplied accessories and attachments 28
- Troubleshooting 29
- Channel list 30
- Low power only 30
- Note simplex channels 3 21 23 61 64 81 82 and 83 cannot be lawfully used by the general public in usa waters 30
- I options 31
- I specifications 31
- Specifications and option 31
- 1 32 kamiminami hirano ku osaka 547 0002 japan 32
- Count on us 32
Похожие устройства
- Bimatek IR301 Инструкция по эксплуатации
- Icom IC-M34 Инструкция по эксплуатации
- Liebherr KBs 3864-20 Инструкция по эксплуатации
- Icom IC-M15 Инструкция по эксплуатации
- Liebherr CTsl 2451-20 Инструкция по эксплуатации
- Icom IC-M45A Инструкция по эксплуатации
- Bosch KGV36VW20R Инструкция по эксплуатации
- Icom IC-M56 Инструкция по эксплуатации
- Hotpoint-Ariston ECF 2014 L Инструкция по эксплуатации
- Icom IC-M304 Инструкция по эксплуатации
- Siemens KG36VXW20R Инструкция по эксплуатации
- Jura Impressa XS90 Инструкция по эксплуатации
- Icom IC-M700PRO Инструкция по эксплуатации
- Bosch KGV36VL20R Инструкция по эксплуатации
- Asko HI1621G EU INDUCTION HOB Инструкция по эксплуатации
- Icom IC-M710 Инструкция по эксплуатации
- Bosch KGV39VW20R Инструкция по эксплуатации
- Asko HI1641S EU INDUCTION HOB Инструкция по эксплуатации
- Icom IC-M59 Инструкция по эксплуатации
- Bosch KGV39VL20R Инструкция по эксплуатации
Скачать
Случайные обсуждения