Icom IC-R1500 [21/56] Memory operation

MEMORY OPERATION

■ General description

The receiver has 1100 memory channels including 100 scan

edge memory channels (50 pairs) for storage of often-used

frequencies. And a total of 21 memory banks, A to H, J to R,

T, U, W and Y are available for storing groups of frequencies,

etc. Up to 100 channels can be assigned into a bank.

Memory channel contents

The following information can be programmed into memory

channels:

• Operating frequency ((p. 9))

• Receive mode ((p. 10))

• Duplex direction (DUP+ or DUP–) with an offset fre-

quency ((p. 15))

•Tone squelch or DTCS squelch ON/OFF ((p. 33))

•Tone squelch frequency or DTCS code with polarity

((p. 38))

• Scan skip information ((p. 28))

■ Memory channel selection

q Push [MR•SKIP] to select memory mode.

•“!” indicator appears.

w Rotate [DIAL] to select the desired memory channel.

• Programmed memory channels can only be selected.

[MR•SKIP] “!” appears

If memory banks or weather channels* mode appears when

pushed [MR•SKIP] at step q, push [MR•SKIP] and rotate

[DIAL] to select “bAnk --,” then push [MR• SKIP] again.

*Available for USA/CANADA versions only.