Metabo BF 18 LTX 90 [13/84] Troubleshooting

Metabo BF 18 LTX 90 [13/84] Troubleshooting
DEUTSCH
13
ENG
battery pack is removed) so that it runs in the
centre of the sanding belt roller.
8.4 Sanding procedure
Switch the machine on first before mounting it on
the workpiece.
Place the machine on the material such that the
sanding belt is parallel to the surface of the work-
piece.
Keep the machine in constant motion because
otherwise recesses could be produced in the
material.
8.5 Replacing the sanding attachment
See illustration C, page 3.
- Removing the sanding belt (see Section 8.2).
- Remove screw (2), and remove sanding attach-
ment (1).
- Attach the other sanding attachment as shown
(ensure that the nose at the end of the sanding
attachment is pointing in the direction of the
tensioning arm, see illustration C).
- Secure with screw (2).
- Attaching the sanding belt (see Section 8.2).
- Adjusting the belt run (see Section 8.3).
Motor cleaning:
blow compressed air through the
rear ventilation slots of the machine regularly,
frequently and thoroughly. Here, the machine must
be held firmly.
The electronic signal display (12) lights up
and the load speed decreases.
The
temperature is too high! Run the machine in
idling until the electronics signal indicator switches
off.
The electronic signal display (12) flashes
and the machine does not start.
The
restart protection is active. The machine will
not start if the battery pack is inserted while the
machine is on. Switch the machine off and on
again.
Do not press the device too firmly against the
surface being sanded. This does not improve, but
rather impairs, the sanding performance.
For optimum operation: Sand on the side on which
the sanding belt moves towards the machine.
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
For a complete range of accessories, see
www.metabo.com or the main catalogue.
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Battery packs must not be disposed of with regular
waste. Please return faulty or used battery packs
to your Metabo dealer.
Do not throw battery packs into water.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-
9 Cleaning, Maintenance
10 Troubleshooting
2
11 Tips and Tricks
12 Accessories
13 Repairs
14 Environmental Protection
17027054_0111 BF 18 LTX 90.book Seite 13 Montag, 31. Januar 2011 10:31 10

Содержание

Скачать