Marta MT-1088 Blue Sapphire [7/11] Cleaning and maintenance

7

OPERATION

BOILING WATER

1.Remove the unit from base. 2.Open the cover. 3.Fill the kettle with your desired amount of water, but not less than MIN line. Do not fill above the MAX line. 4.Close the lid. 5.Place the kettle on base,

ensuring that it is correctly engaged. 6.Connect cord to power outlet and switch unit ON by pressing “On/Off” button; the indicator inside lights up in red. 7.The kettle will switch off automatically when

water has come to a boil, the indicator in the kettle will turn off and two beeps sounds.

HEATING WATER TO SELECTED TEMPERATURE

Put the kettle onto the power base, press "+/-" button to select your desired keep-warm temperature (50， 70， 80 or 90°C）, after select it, its corresponding indicator lights on. Then press and hold

“On/Off” button for 3 seconds, the kettle will enter into keep-warm mode. When water reaches the selected temperature, one beep sounds and kettle will enter into the keep-warm condition; the

indicator on control block keeps blinking in a cycle of one time/second. After keeping warm for 30 minutes, the kettle will shut off automatically and all the indicators will turn off. Press “On/Off” button to

turn off KEEP WARM MODE if necessary.

To stop boiling, heating or keep warm mode, press ON/OFF button.

After use, unplug and empty unused water. Ensure kettle is switched off before removing from base. Heating can be stopped at any time by the operating the switch. As a safety feature, the unit may

not start immediately after shutting off. Please allow 15 to 20 seconds for kettle to cool down before switching on again. If kettle ever boils dry, please wait 15 minutes for unit to cool before refilling with

cold water. The safety cut-off will automatically reset during this time. Do not open lid when in operation. Steam escaping from the spout is hot. This appliance is only suitable for heating water; do not

with Citric Acid/lemon and water mixture. Allow the unit to boil the solution two to three times. Rinse clean and wipe with a soft cloth.

SPECIFICATION