Metabo RWE 1100 [11/60] Repairs
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Metabo RWE 1100 [11/60] Repairs

Metabo RWE 1100 [11/60] Repairs
ENGLISH
11
ENG
To attach it:
Put the stirrer quick-change system onto the
spindle (a). Turn the locking device in the direction
of the arrow (b) until the stirrer quick-change
system can be pushed completely onto the spindle.
Let go of the locking device. Check whether the
stirrer quick-change system is tight.
To remove:
Turn the locking device in the direction of the arrow
up to the stop (a) and remove (b).
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.
Metabo's packaging can be 100% recycled.
Worn out power tools and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline
2002/96/EC on used electronic and electric
equipment and its implementation in national legal
systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.
Explanatory notes on the information on page 2.
Changes due to technological progress reserved.
P
1
= Rated power consumption
P
2
= Power output
n
1
= No load speed
n
2
= On load speed
G = Spindle thread
m=Weight
D = Spindle collar diameter
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745:
a
h, D
= Vibration emission value
K
h, D
= Unsafe (vibration)
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the tool
is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Typical A-effective perceived sound levels:
L
pA
= Sound pressure level
L
WA
= Acoustic power level
K
pA
, K
WA
= Unsafe (noise level)
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
10 Repairs
11 Environmental Protection
12 Technical Specifications
17026753_0411 RWE 1100.book Seite 11 Dienstag, 3. Mai 2011 10:34 10

Содержание

Похожие устройства

Скачать