Candy CFT62/3X [12/32] Charcoal filter filter version only

Charcoal filter (filter version only)

It absorbs unpleasant odours caused by cooking.

The saturation of the charcoal filter occurs after more or less

prolonged use, depending on the type of cooking and the

regularity of cleaning of the grease filter.

In any case it is necessary to replace the cartridge at least

every four mounths.

The charcoal filter may NOT be washed or regenerated.

It may be one of the following types:

Rectangular S1 or S2 or S3:

Mounting (S1 or S2) : insert the rear side T and hook further to

the front (U).

Mounting (S3): Remove the cover W by rotating the O knobs to

90° ,fit the filter inside and lock in place with the central knob O,

then close the cover.

Proceed in the inverse for dismounting.

Circular (V1-V2-V3-various models):

Bayonet mount position the filter in the middle of the motor

protection grill covering ensuring that the reference to X1 or X2 or

X3 on the carbon filter match the Y1 or Y2 references on the

conveyor, then turn clockwise; in case of dismounting turn

anticlockwise, if provided with a Z tape remember to gently lift first.

Replacing lamps

Disconnect the hood from the electricity.

Warning! Prior to touching the light bulbs ensure they are

cooled down.

Replace the damaged lamp.

Use Ø35mm E14 28W halogen candle lamps only.

If the lights do not work, make sure that the lamps are fitted

properly into their housings before you call for technical

assistance.