Microlife BP 3BT0-A [10/50] Qh ioj 8h
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Microlife BP 3BT0-A [10/50] Qh ioj 8h

Microlife BP 3BT0-A [10/50] Qh ioj 8h
Make sure that the tube is not kinked.
Comment:
If it is not possible to fit the cuff to the left arm, it can also be
placed on the right one. However all measurements should be
made using the same arm
5.4. Measuring procedure
After the cuff has been appropriately positioned the measurement can begin:
a) Press the O/I + MEMORY-button, – the pump begins to
inflate the cuff. In the display, the increasing cuff-pressure
is continually displayed.
b) After reaching the inflation pressure, the pump stops and
the pressure slowly falls away. The cuff-pressure (large
characters) is displayed during the measurement.
c) When the device has detected the pulse, the heart symbol
in the display begins to blink and a peep tone is audible
for every pulse beat.
d) When the measurement has been concluded, a long peep
tone sounds. The measured systolic and diastolic blood-
pressure values as well as the pulse frequency are now
displayed.
e) The measurement results are displayed, until you switch
the device off. If no button is pressed for 5 minutes, the
device switches automatically off, to save the batteries.
5.5. Memory – displaying the last measurement
The measured results are stored in the instrument
until a new measurement is carried out or the
batteries are removed. You can call up the stored
values at any time by pressing the MEMORY button
for at least 3 seconds.
5.6. Discontinuing a measurement
If it is necessary to interrupt a blood pressure
measurement for any reason (e.g the patient feels
unwell), the O/I button can be pressed at any time.
The device then immediately lowers the cuff-pressure
7
MR
3 sec.

Содержание

Похожие устройства

Make sure that the tube is not kinked Comment If it is not possible to fit the cuff to the left arm it can also be placed on the right one However all measurements should be made using the same arm 5 4 Measuring procedure After the cuff has been appropriately positioned the measurement can begin a Press the O l MEMORY button the pump begins to inflate the cuff In the display the increasing cuff pressure is continually displayed b After reaching the inflation pressure the pump stops and the pressure slowly falls away The cuff pressure large characters is displayed during the measurement c When the device has detected the pulse the heart symbol in the display begins to blink and a peep tone is audible for every pulse beat d When the measurement has been concluded a long peep tone sounds The measured systolic and diastolic blood I Ij pressure values as well as the pulse frequency are now displayed e The measurement results are displayed until you switch the device off If no button is pressed for 5 minutes the device switches automatically off to save the batteries 5 5 Memory displaying the last measurement The measured results are stored in the instrument until a new measurement is carried out or the batteries are removed You can call up the stored QH IOJ 8H U values at any time by pressing the MEMORY button for at least 3 seconds IE 5 6 Discontinuing a measurement If it is necessary to interrupt a blood pressure measurement for any reason e g the patient feels unwell the 0 1 button can be pressed at any time The device then immediately lowers the cuff pressure 7

Скачать