Daikin FHC40JEV1K [20/24] Operating range
![Daikin RD50JEY1K [20/24] Operating range](/views2/1784692/page20/bg14.png)
OPERATING RANGE
OVERALL CHECKING
PHASE PROTECTOR (OPTIONAL)
Outdoor
DB (°C)
54
52
19
14 19
23
Indoor WB (°C)
DB = Dry Bulb WB = Wet Bulb
The unit with Scroll Compressor can only rotate in one direction. For this reason, a protective device (phase protector) is Þ tted
to prevent incorrect wiring of the electrical phases. When the three phases are not connected correctly, the phase sequencer
operates, and the unit will not start. This device is located in the control box of the outdoor unit.
The following table shows the LED indicator light for phase protector under normal operation and fault conditions.
NOTE
1. “+” indicates additional functions for PP01 phase protector.
2. When R phase missing, no LED or buzzer will indicate the error, but relay 71 and relay 81 will cut off.
Ensure the following, in particular:-
1) The unit is mounted solidly and rigid in position.
2) Piping and connections are leak proof after charging.
3) Proper wiring has been done.
Drainage check:- Pour some water into left side of drain pan
(drainage are in right side of unit).
Test run:
1) Conduct a test run after water drainage test and gas leakage
test.
•
2) Watch out for the following:-
a) Is the electric plug Þ rmly inserted into the socket?
b) Is there any abnormal sound from unit?
c) Is there smooth drainage of water?
Check that:
Condenser fan is running, with warm air blowing off the
condensing unit.
Evaporator blower is running and discharge cool air.
The remote controller incorporates a 3 minute delay in the
circuit. Thus, it requires about 3 minutes before the outdoor
condensing unit can start up.
•
1.
2.
3.
LED
Description
PW
(Red)
P_R
(Yellow)
P_S
(Yellow)
P_T
(Yellow)
Actions
Normal operation
-
Reverse phase Switch off the unit. Check the 3 phase wiring.
T phase missing
Switch off the unit. Check the 3 phase wiring.
S phase missing Switch off the unit. Check the 3 phase wiring.
R phase missing
Switch off the unit. Check the 3 phase wiring.
S &T phase missing
+
Switch off the unit. Check the 3 phase wiring.
Overload
+
High discharge temperature. Check the refrigerant system.
Sensor missing
+
Switch off the unit. Plug in sensor.
ON
OFF Fast Blink
COOLING
Содержание
- Installation manual 1
- R22 split series 1
- English 3
- Outline and dimensions 3
- Outline and dimensions 4
- English 5
- Installation manual 6
- Notice 6
- Safety precautions 6
- Warning caution 6
- English 7
- Indoor unit 7
- Installation diagram 7
- Outdoor unit 7
- Installation of the indoor unit 8
- Ceiling concealed drain piping work 9
- English 9
- Caution 10
- Installation of the outdoor unit 10
- All model a b c d 11
- English 11
- Gas pipe size mm in 11
- Installation clearance 11
- Liquid pipe size mm in 11
- Max allowable elevation m 11
- Max allowable length m 11
- Maximum pipe length 11
- Minimum distance mm 300 1000 300 500 11
- Model indoor 11
- Outdoor 11
- Outdoor units must be installed such that there is no short circuit of the hot discharge air or obstruction to smooth air ow select the coolest possible place where intake air should not be hotter than the outside temperature refer to operating range 11
- Refrigerant piping 11
- Remark for fdm60jev1k cooling unit recommended to add 6 kg external accumulator 11
- When the pipe length becomes too long both the capacity and reliability drop as the number of bends increases system piping resistance to the refrigerant ow increases thus lowering the cooling capacity as a result compressor reliability will be affected always choose the shortest path and follow the recommendation as tabulated below 11
- Piping connection to the units 12
- Piping works and flaring technique 12
- Electrical connection 13
- English 13
- English 15
- Charge operation 17
- English 17
- Vacuuming and charging 17
- Vacuuming the piping and the indoor unit 17
- Additional charge 18
- Special precautions when charging unit with scroll compressors 18
- Caution 19
- English 19
- Indicator lights 19
- Operating range 20
- Overall checking 20
- Phase protector optional 20
- Caution 21
- English 21
- Service and maintenance 21
- Troubleshooting 21
Похожие устройства
- Thorvik AIW12717 Инструкция по эксплуатации
- Thorvik AIW12717 Брошюра
- Thorvik AIW12122 Брошюра
- Thorvik AIW12122 Инструкция по эксплуатации
- Thorvik AIW12122 Деталировка
- Thorvik AIW3416M Брошюра
- Thorvik AIW3416M Инструкция по эксплуатации
- Thorvik AIWS125M Брошюра
- Thorvik AIWS125M Инструкция по эксплуатации
- Thorvik AIWS124M Брошюра
- Thorvik AIWS124M Инструкция по эксплуатации
- Thorvik AAG0510 Брошюра
- Thorvik AAG0510 Инструкция по эксплуатации
- Thorvik AOS6105 Брошюра
- Thorvik AOS6105 Инструкция по эксплуатации
- Thorvik ARW1261 Брошюра
- Thorvik ARW1261 Инструкция по эксплуатации
- Thorvik ARW3827 Брошюра
- Thorvik ARW3827 Инструкция по эксплуатации
- Thorvik RAD1018 Брошюра